100-D250EJ00

The 100-D250EJ00 IEC non-reversing contactor by Allen-Bradley is a 3-phase contactor from the Bulletin 100-D contactor family that is designed to provide low-cost, high-performance switching to a wide range of applications. This Bulletin 100-D series contactor features a lower power consumption rating than other conventional contactors, and it is built to be compact to minimize panel space. The 100-D250EJ00 contactor is rated to withstand high vibration and shock conditions. It has a rugged design that makes it suitable for high thermal and high-voltage electrical applications. It is RoHS compliant and features an eco-friendly design. The 100-D250EJ00 contactor has a touch-proof IP 20 enclosure that houses the contacts, coil, and other internal components. It is designed for use at a rated ambient temperature range of-25 degrees Celsius and 60 degrees Celsius.

The Allen-Bradley 100-D250EJ00 contactor is supplied as a complete contactor without terminals and auxiliary contacts. Up to 4 user-supplied auxiliary contacts can be added to the contactor to enhance control. Terminals and lugs can also be ordered to simplify the setup and installation processes. The 100-D250EJ00 contactor has 3 power contacts which are normally open and labelled L3, L2, and L1 that the power source can be wired to. These contacts all have flat terminals that can easily be bolted down with screws, thereby simplifying the wiring process. A power source with 3-phase AC voltage in the range of 115 to 600 Volts AC (at 50 to 60 Hertz) can be wired directly to these contacts (the main power contacts). The main circuit has a rated breaking current of 250 Amps (at 400 Volts AC) and a maximum switching power rating of 150 kilowatts. The 100-D250EJ00 contactor has an AC-controlled electronic coil with a 24 Volts AC coil voltage rating. It also has an integrated PLC interface and a surge suppression circuit.