100-D250EP11 | Allen Bradley PLC IEC 100 Contactors

100-D250EP11

100-D250EP11

Description:

The Allen-Bradley 100-D250EP11 contactor is a Bulletin 100-D contactor. It belongs to the Allen-Bradley Bulletin 100-D series of IEC contactors. The current rating of the 100-D250EP11 contactor is 250 Amps with 3-phase voltage.

Rated 5 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D250EP11

Add more parts to quote

Description:

The Allen-Bradley 100-D250EP11 contactor is a Bulletin 100-D contactor. It belongs to the Allen-Bradley Bulletin 100-D series of IEC contactors. The current rating of the 100-D250EP11 contactor is 250 Amps with 3-phase voltage.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D250EP11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 6 reviews

    Technical Specifications for 100-D250EP11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D250EP11
Product TypeContactor
Coil TypeElectronic
Current Rating250 Amps (3-Phase Voltage)
Control Voltage100 Volts AC
Poles3
MountingPanel
Isolation Voltage1000 Volts (IEC)
Maximum Impulse Withstand12 Kilovolts
Protection RatingIP 00
Auxiliary Contacts2
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D250EP11
Product TypeContactor
Coil TypeElectronic
Current Rating250 Amps (3-Phase Voltage)
Control Voltage100 Volts AC
Poles3
MountingPanel
Isolation Voltage1000 Volts (IEC)
Maximum Impulse Withstand12 Kilovolts
Protection RatingIP 00
Auxiliary Contacts2
s

About 100-D250EP11

The 100-D250EP11 contactor is a 3-pole IEC contactor with a 100 Volts AC-rated control coil. It is part of the Allen-Bradley Bulletin 100-D series which belongs to the broader Allen-Bradley  Bulletin 100 contactor product line. The technical specifications of the contactor include 250 Amps of rated current and 2 auxiliary contacts along with its 3 main contacts. The auxiliary contacts include 1 normally closed contact and 1 normally open contact. The auxiliary contacts on the 100-D250EP11 contactor have an IP 20 protection rating. The contactor itself has an IP 00 protection rating and it is designed for panel mounting. The 100-D250EP11 contactor is not suitable for outdoor use and it should only be used indoors. The single-phase current rating of the contactor is 350 Amps at 1000, 690, and 500 Volts AC. The output power ratings that the contactor can support at 230 and 1000 Volts AC (single-phase) are 139 kilowatts and 606 kilowatts, respectively.



For applications involving the switching of 3-phase AC motors, the Allen-Bradley 100-D250EP11 Bulletin 100-D contactor is rated for 250 Amps at 230, 240, 400, and 690 Volts AC 3-phase voltage. The output power ratings for 3-phase applications are 80, 177, and 132 kilowatts at 230, 500, and 1000 Volts respectively. The 100-D250EP11 contactor is rated for 10 million operations at 90 Amps at 1 million operations at 115 Amps. The contactor height is 205 millimeters, the width is 155 millimeters, and the depth is 180 millimeters. Allen-Bradley recommends mounting the contactor vertically. A maximum tilt of +/- 25 degrees relative to the vertical axis is allowed. A maximum rotation of +/- 90 degrees relative to the upright mounting position is also allowed. Only original spare parts should be used for the 100-D250EP11 contactor.



Repair Services for 100-D250EP11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D250EP11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D250EP11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D250EP11

Resolutions For 100-D250EP11

About

Technical Specifications for 100-D250EP11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D250EP11
Product TypeContactor
Coil TypeElectronic
Current Rating250 Amps (3-Phase Voltage)
Control Voltage100 Volts AC
Poles3
MountingPanel
Isolation Voltage1000 Volts (IEC)
Maximum Impulse Withstand12 Kilovolts
Protection RatingIP 00
Auxiliary Contacts2
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D250EP11
Product TypeContactor
Coil TypeElectronic
Current Rating250 Amps (3-Phase Voltage)
Control Voltage100 Volts AC
Poles3
MountingPanel
Isolation Voltage1000 Volts (IEC)
Maximum Impulse Withstand12 Kilovolts
Protection RatingIP 00
Auxiliary Contacts2

About 100-D250EP11

The 100-D250EP11 contactor is a 3-pole IEC contactor with a 100 Volts AC-rated control coil. It is part of the Allen-Bradley Bulletin 100-D series which belongs to the broader Allen-Bradley  Bulletin 100 contactor product line. The technical specifications of the contactor include 250 Amps of rated current and 2 auxiliary contacts along with its 3 main contacts. The auxiliary contacts include 1 normally closed contact and 1 normally open contact. The auxiliary contacts on the 100-D250EP11 contactor have an IP 20 protection rating. The contactor itself has an IP 00 protection rating and it is designed for panel mounting. The 100-D250EP11 contactor is not suitable for outdoor use and it should only be used indoors. The single-phase current rating of the contactor is 350 Amps at 1000, 690, and 500 Volts AC. The output power ratings that the contactor can support at 230 and 1000 Volts AC (single-phase) are 139 kilowatts and 606 kilowatts, respectively.



For applications involving the switching of 3-phase AC motors, the Allen-Bradley 100-D250EP11 Bulletin 100-D contactor is rated for 250 Amps at 230, 240, 400, and 690 Volts AC 3-phase voltage. The output power ratings for 3-phase applications are 80, 177, and 132 kilowatts at 230, 500, and 1000 Volts respectively. The 100-D250EP11 contactor is rated for 10 million operations at 90 Amps at 1 million operations at 115 Amps. The contactor height is 205 millimeters, the width is 155 millimeters, and the depth is 180 millimeters. Allen-Bradley recommends mounting the contactor vertically. A maximum tilt of +/- 25 degrees relative to the vertical axis is allowed. A maximum rotation of +/- 90 degrees relative to the upright mounting position is also allowed. Only original spare parts should be used for the 100-D250EP11 contactor.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D250EP11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D250EP11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF