100-D250EZA11

The Allen-Bradley 100-D250EZA11 Bulletin 100-D IEC contactor has 2 side-mounted auxiliary contact blocks. These contact blocks consist of one normally closed and one normally open contact, and they feature a snap-in design that allows for easy and quick mounting on the contactor side without specialized tools. Two additional auxiliary contacts (either normally open or normally closed) can be added to support feedback wiring. On the main circuit of the contactor, there are 3 normally open contacts that are labeled “L1,” “L2,” and “L3.” These contacts support a direct bolt-in connection to the main power supply, and they also have flat-end terminals that allow for quick wiring and installation. Optional line-side terminals and terminal lugs can be added to simplify the installation and wiring processes.

The Allen-Bradley 100-D250EZA11 Bulletin 100-D IEC contactor can be wired directly to an external power supply. It has a maximum kilowatt output power rating of 150 kilowatts. The 100-D250EZA11 contactor also has a rated operating current of 250 Amps. It offers a circuit voltage isolation rating of up to 1000 Volts AC per the IEC standards and an impulse voltage withstand rating of 12 kilowatts. The 100-D250EZA11 contactor features a low-switching electronic DC-actuated coil with a built-in PLC interface. This coil has a low signal voltage rating of 24 Volts DC at 15 milliamps and a rated pickup voltage range of 13 Volts DC to 30.2 Volts DC. The coil has Class B insulation and an operating voltage range of 200 Volts DC to 255 Volts DC. The 100-D250EZA11 contactor has a rated operating temperature range of -25 degrees Celsius to 60 degrees Celsius.