Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D250VN11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D250VN11

|
Need a Specific Revision?

The Allen-Bradley 100-D250VN11 contactor is a Bulletin 100-D series contactor. It has a current rating of 250 Amps. The 100-D250VN11 contactor is a 3-pole contactor with 3 main contacts and 2 auxiliary contacts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D250VN11

ManufacturerAllen Bradley
Product TypeContactor
Product LineIEC 100 Contactors
Part Number100-D250VN11
Weight10.00 lbs (4.54 kg)
Current Rating250 Amps
Poles3
MountingPanel
NO Auxiliary Contacts1
NC Auxiliary Contacts1
Protection RatingIP 00
Operating Temperature-25 to 60 degrees Celsius
Storage Temperature-40 to 80 degrees Celsius
Request a Repair

The 100-D250VN11 contactor is a 3-pole type of industrial contactor. It is designed by Allen-Bradley/Rockwell Automation for use in motor switching applications and lighting applications. This contactor has a rated operational current carrying capability of 250 Amps. When it is used with gas discharge lamps at an ambient temperature of 40 degrees Celsius, the 100-D250VN11 contactor is rated for 315 Amps if it is used as open equipment without an enclosure and it is rated for 270 Amps when it is installed in an enclosure for a higher degree of protection. The main current circuit resistance rating is 0.22 megaohms. The rated power dissipation by all the circuits at 400 Volts AC 3-phase voltage is 41.7 Watts. The rated mechanical lifespan for the 100-D250VN11 contactor is approximately 10 million operations and the rated electrical lifespan is approximately 1 million operations at a rated voltage of 400 Volts AC. The approximate weight of the 100-D250VN11 contactor is 7.5 kilograms and the isolation voltage rating according to the IEC standards is 1000 Volts.

The rated impulse voltage withstand for the Allen-Bradley/Rockwell Automation 100-D250VN11 Bulletin 100-D contactor is 12 kilovolts. The ambient specifications for the contactor include a -40 to 80 degrees Celsius storage temperature range and a -25 to 60 degrees Celsius working temperature range. The contactor current derates at higher temperatures and falls by at least 15% at a maximum ambient temperature of 70 degrees Celsius. The maximum altitude of the installation site recommended by Allen Bradley is 2000 meters above sea level per the IEC 60947 standards. The protection rating for the 100-D250VN11 contactor is IP 00. The contactor is designed for panel mounting inside a suitable industrial cabinet. Two auxiliary contacts which include a normally open contact and a normally closed contact are available on the 100-D250VN11 contactor. Only properly trained technicians should be involved in device installation and only original spare parts from Allen-Bradley should be used for the replacement of faulty parts on the 100-D250VN11 contactor.