Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D420ED00

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D420ED00

|
Need a Specific Revision?

The Allen-Bradley 100-D420ED00 Bulletin 100-D IEC contactor is designed for a wide range of applications. The 100-D420ED00 contactor features a low switching power rating to save energy and costs. The 100-D420ED00 contactor has a rated operating current of 420 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D420ED00

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D420ED00
UPC781180105609
Weight16.00 lbs (7.26 kg)
DescriptionAC-Operated Contactor
Current Rating420 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage110 to 130 Volts AC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsNone
Maximum Protection ClassIP 20
Request a Repair

The 100-D420ED00 DC-operated contactor is an Allen-Bradley/Rockwell Automation Bulletin 100-D contactor. This unit belongs to the Bulletin 100-D series of compact contactors that are designed for high current applications. The 100-D420ED00 contactor features a built-in surge suppression feature that protects it against high voltage and current levels. It also features a high voltage isolation rating (up to 1000 Volts by the IEC standards) and a high impulse voltage withstand rating (up to 12 kilovolts). The 100-D420ED00 contactor has a rated switching power of 250 kilowatts and a rated operating current of 420 Amps. The 100-D420ED00 contactor comes with an electronic AC coil that has low switching ratings. This coil has an operating voltage range of 110 to 130 Volts AC and a nominal signal voltage rating of 24 Volts DC at 15 milliamps.

The Allen-Bradley 100-D420ED00 Bulletin 100-D contactor supports an integrated PLC interface for connection to a PLC system. By using the additionally supplied S1 PLC switch on the coil circuit, the contactor can be integrated into a PLC system without an interposing relay. The contactor operation and control settings can be programmed directly from a CPU or HMI device. The 100-D420ED00 contactor has Class B type coil insulation and it supports an IP 20 rated enclosure. It is built for high-thermal applications with an operating temperature range between -25 degrees Celsius and 60 degrees Celsius. The 100-D420ED00 contactor can withstand high operational shock and high vibration ratings. The 100-D420ED00 contactor is supplied with 3 main contacts or power terminals that are normally open for direct wiring to a power circuit. Optional terminals and auxiliary contacts can be added to the contactor to meet specific application demands.