100-D420EY11 | Allen Bradley PLC IEC 100 Contactors

100-D420EY11

100-D420EY11

Description:

The Allen-Bradley 100-D420EY11 contactor is a Bulletin 100-D compact 3-pole contactor designed to provide low-cost switching in a wide range of applications. The 100-D420EY11 contactor has 2 side-mounted auxiliary contacts and 3 normally open main circuit contacts for direct 3-phase wiring. The 100-D420EY11 has a breaking current rating of 420 Amps.

Rated 4.7 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D420EY11

Add more parts to quote

Description:

The Allen-Bradley 100-D420EY11 contactor is a Bulletin 100-D compact 3-pole contactor designed to provide low-cost switching in a wide range of applications. The 100-D420EY11 contactor has 2 side-mounted auxiliary contacts and 3 normally open main circuit contacts for direct 3-phase wiring. The 100-D420EY11 has a breaking current rating of 420 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D420EY11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 7 reviews

    Technical Specifications for 100-D420EY11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EY11
DescriptionAC-Operated Contactor
Voltage Range230 to 600 Volts AC
Current Rating420 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage42 to 64 Volts AC
PLC InterfaceYes
Number Of Poles3
Terminal TypeBolt-In Type
Auxiliary ContactsSupported
Maximum Protection ClassIP 20 (with a Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EY11
DescriptionAC-Operated Contactor
Voltage Range230 to 600 Volts AC
Current Rating420 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage42 to 64 Volts AC
PLC InterfaceYes
Number Of Poles3
Terminal TypeBolt-In Type
Auxiliary ContactsSupported
Maximum Protection ClassIP 20 (with a Terminal Block)
s

About 100-D420EY11

The 100-D420EY11 contactor is an Allen-Bradley Bulletin 100-D series compact 3-phase contactor that is designed for high load applications. The 100-D420EY11 contactor is rated for operation with AC voltage and with AC motors. It can operate with AC motors with voltage ratings from 230 and 1000 Volts AC (per the IEC standards) at 50 to 60 Hertz. The 100-D420EY11 contactor also has a rated breaking value of 420 Amps and a maximum rated output power of 250 kilowatts at 415 Volts AC. It has a coil voltage range of 42 Volts AC to 64 Volts AC and a coil frequency range between 50 Hertz and 60 Hertz. The 100-D420EY11 contactor’s AC-operated electronic coil controls the contact movements. This coil is fitted with a PLC interface that allows for direct integration into a PLC system. The onboard PLC switch is directly connected to the coil circuit and it supports direct PLC wiring without interposing relays. The 100-D420EY11 contactor has signal ratings of 24 Volts DC and 15 milliamps.



The Allen-Bradley 100-D420EY11 Bulletin 100-D contactor has “Class B” insulation for its electronic coil. This insulation type offers 130 degrees Celsius-rated thermal insulation at a full contactor operating ratings. The 100-D420EY11 contactor also features a touch-proof industrial enclosure that houses its contacts and coil as well as providing protection against dust and other smaller contaminants. The 100-D420EY11 contactor features premium-grade components that are designed to provide long-lasting operation in extreme industrial conditions. It is also made of eco-friendly materials that are RoHS certified. The 100-D420EY11 contactor is c-UL-us, CCC, and CE certified, and it is designed to comply with the IEC, CSA, and UL industrial standards. It supports a wide range of renewal parts and accessories to enhance the operation, reduce waste, and provide flexibility.



Repair Services for 100-D420EY11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D420EY11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D420EY11

Resolutions For 100-D420EY11

About

Technical Specifications for 100-D420EY11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EY11
DescriptionAC-Operated Contactor
Voltage Range230 to 600 Volts AC
Current Rating420 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage42 to 64 Volts AC
PLC InterfaceYes
Number Of Poles3
Terminal TypeBolt-In Type
Auxiliary ContactsSupported
Maximum Protection ClassIP 20 (with a Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EY11
DescriptionAC-Operated Contactor
Voltage Range230 to 600 Volts AC
Current Rating420 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage42 to 64 Volts AC
PLC InterfaceYes
Number Of Poles3
Terminal TypeBolt-In Type
Auxiliary ContactsSupported
Maximum Protection ClassIP 20 (with a Terminal Block)

About 100-D420EY11

The 100-D420EY11 contactor is an Allen-Bradley Bulletin 100-D series compact 3-phase contactor that is designed for high load applications. The 100-D420EY11 contactor is rated for operation with AC voltage and with AC motors. It can operate with AC motors with voltage ratings from 230 and 1000 Volts AC (per the IEC standards) at 50 to 60 Hertz. The 100-D420EY11 contactor also has a rated breaking value of 420 Amps and a maximum rated output power of 250 kilowatts at 415 Volts AC. It has a coil voltage range of 42 Volts AC to 64 Volts AC and a coil frequency range between 50 Hertz and 60 Hertz. The 100-D420EY11 contactor’s AC-operated electronic coil controls the contact movements. This coil is fitted with a PLC interface that allows for direct integration into a PLC system. The onboard PLC switch is directly connected to the coil circuit and it supports direct PLC wiring without interposing relays. The 100-D420EY11 contactor has signal ratings of 24 Volts DC and 15 milliamps.



The Allen-Bradley 100-D420EY11 Bulletin 100-D contactor has “Class B” insulation for its electronic coil. This insulation type offers 130 degrees Celsius-rated thermal insulation at a full contactor operating ratings. The 100-D420EY11 contactor also features a touch-proof industrial enclosure that houses its contacts and coil as well as providing protection against dust and other smaller contaminants. The 100-D420EY11 contactor features premium-grade components that are designed to provide long-lasting operation in extreme industrial conditions. It is also made of eco-friendly materials that are RoHS certified. The 100-D420EY11 contactor is c-UL-us, CCC, and CE certified, and it is designed to comply with the IEC, CSA, and UL industrial standards. It supports a wide range of renewal parts and accessories to enhance the operation, reduce waste, and provide flexibility.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF