100-D420EZA11 | Allen Bradley PLC IEC 100 Contactors

100-D420EZA11

100-D420EZA11

Description:

The 100-D420EZA11 contactor is a compact Allen-Bradley Bulletin 100-D IEC contactor built for a wide range of electrical applications. The 100-D420EZA11 contactor is built to provide electrical switching for large-frame industrial applications. It has a rated breaking current of 420 Amps.

Rated 4.5 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D420EZA11

Add more parts to quote

Description:

The 100-D420EZA11 contactor is a compact Allen-Bradley Bulletin 100-D IEC contactor built for a wide range of electrical applications. The 100-D420EZA11 contactor is built to provide electrical switching for large-frame industrial applications. It has a rated breaking current of 420 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D420EZA11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 19 reviews

    Technical Specifications for 100-D420EZA11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZA11
DescriptionDC-Operated Contactor
Current Rating420 Amps
Coil TypeStandard DC Electronic Coil
Coil Voltage200 to 255 Volts DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Maximum Protection ClassIP 20 (with a Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZA11
DescriptionDC-Operated Contactor
Current Rating420 Amps
Coil TypeStandard DC Electronic Coil
Coil Voltage200 to 255 Volts DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Maximum Protection ClassIP 20 (with a Terminal Block)
s

About 100-D420EZA11

The 100-D420EZA11 Bulletin 100-D IEC contactor from Allen-Bradley is designed to provide electrical switching to AC motors that are used in high-current applications. The 100-D420EZA11 contactor supports AC voltage for operation. It can be operated with industrial AC motors that operate at a voltage rating of up to 1000 Volts AC. The 100-D420EZA11 contactor has a maximum rated breaking current value of 420 Amps (AC-3) at 400 Volts AC and a maximum power rating (AC-3 duty) of 250 kilowatts at 415 Volts AC. It has a rated isolation voltage of 1000 Volts (per the IEC standards) and a maximum impulse withstand rating of 12,000 Volts. The 100-D420EZA11 contactor is supplied with a DC-operated electronic coil with an integrated PLC interface. This coil has a rated operating range between 200 Volts DC and 255 Volts DC. It also has rated signal voltage and current ratings of 24 Volts DC (nominal) and 15 milliamps, respectively, and a rated pickup voltage range of 13 to 30.2 Volts DC. 



The Allen-Bradley 100-D420EZA11 Bulletin 100-D IEC contactor has a rated operating temperature range of -25 to 60 degrees Celsius, and it is designed for operating at a maximum altitude of 2000 meters. The 100-D420EZA11 contactor can support an IP 20 ingress protection level-rated enclosure that provides a sealed housing for the contactor’s internal components and prevents the users from touching its hazardous internal electrical parts. Its coil is insulated with Class B type insulation, which provides robust thermal and electrical insulation at the full operating load ratings. The internal parts of the contactor are made from premium-grade materials that are eco-friendly and that are designed to meet the RoHS environmental standards. The 100-D420EZA11 contactor is designed to meet relevant worldwide industry standards such as the CSA, UL, and IEC standards, and it meets several global industrial certifications, including the CCC, CE, and c-UL-us certifications.



Repair Services for 100-D420EZA11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZA11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D420EZA11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D420EZA11

Resolutions For 100-D420EZA11

About

Technical Specifications for 100-D420EZA11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZA11
DescriptionDC-Operated Contactor
Current Rating420 Amps
Coil TypeStandard DC Electronic Coil
Coil Voltage200 to 255 Volts DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Maximum Protection ClassIP 20 (with a Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZA11
DescriptionDC-Operated Contactor
Current Rating420 Amps
Coil TypeStandard DC Electronic Coil
Coil Voltage200 to 255 Volts DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Maximum Protection ClassIP 20 (with a Terminal Block)

About 100-D420EZA11

The 100-D420EZA11 Bulletin 100-D IEC contactor from Allen-Bradley is designed to provide electrical switching to AC motors that are used in high-current applications. The 100-D420EZA11 contactor supports AC voltage for operation. It can be operated with industrial AC motors that operate at a voltage rating of up to 1000 Volts AC. The 100-D420EZA11 contactor has a maximum rated breaking current value of 420 Amps (AC-3) at 400 Volts AC and a maximum power rating (AC-3 duty) of 250 kilowatts at 415 Volts AC. It has a rated isolation voltage of 1000 Volts (per the IEC standards) and a maximum impulse withstand rating of 12,000 Volts. The 100-D420EZA11 contactor is supplied with a DC-operated electronic coil with an integrated PLC interface. This coil has a rated operating range between 200 Volts DC and 255 Volts DC. It also has rated signal voltage and current ratings of 24 Volts DC (nominal) and 15 milliamps, respectively, and a rated pickup voltage range of 13 to 30.2 Volts DC. 



The Allen-Bradley 100-D420EZA11 Bulletin 100-D IEC contactor has a rated operating temperature range of -25 to 60 degrees Celsius, and it is designed for operating at a maximum altitude of 2000 meters. The 100-D420EZA11 contactor can support an IP 20 ingress protection level-rated enclosure that provides a sealed housing for the contactor’s internal components and prevents the users from touching its hazardous internal electrical parts. Its coil is insulated with Class B type insulation, which provides robust thermal and electrical insulation at the full operating load ratings. The internal parts of the contactor are made from premium-grade materials that are eco-friendly and that are designed to meet the RoHS environmental standards. The 100-D420EZA11 contactor is designed to meet relevant worldwide industry standards such as the CSA, UL, and IEC standards, and it meets several global industrial certifications, including the CCC, CE, and c-UL-us certifications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZA11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZA11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF