100-D420EZY00 | Allen Bradley PLC IEC 100 Contactors

100-D420EZY00

100-D420EZY00

Description:

The 100-D420EZY00 contactor is an Allen-Bradley Bulletin 100-D IEC contactor. It has a 420-Amp current rating. The mechanical lifespan of the 100-D420EZY00 contactor is 10 million operations.

 
Rated 4.6 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D420EZY00

Add more parts to quote

Description:

The 100-D420EZY00 contactor is an Allen-Bradley Bulletin 100-D IEC contactor. It has a 420-Amp current rating. The mechanical lifespan of the 100-D420EZY00 contactor is 10 million operations.

 

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D420EZY00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 12 reviews

    Technical Specifications for 100-D420EZY00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZY00
Product TypeContactor
Poles3
Current Rating420 Amps
Coil TypeElectronic
Control Voltage48 to 72 Volts DC
Protection RatingIP 00
Auxiliary Contacts0
Operating Temperature-25 to 60 degrees Celsius
Mechanical Lifespan10 million
Electrical Lifespan1 million
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZY00
Product TypeContactor
Poles3
Current Rating420 Amps
Coil TypeElectronic
Control Voltage48 to 72 Volts DC
Protection RatingIP 00
Auxiliary Contacts0
Operating Temperature-25 to 60 degrees Celsius
Mechanical Lifespan10 million
Electrical Lifespan1 million
s

About 100-D420EZY00

The Allen-Bradley 100-D420EZY00 contactor is a large contactor that belongs to the Bulletin 100-D series of IEC contactors. This series of contactors made by Allen-Bradley complies with standards such as the CSA 22.2 and UL 508 standards, and it is certified by the CE, CCC, and cULus standards. The rated isolation voltage for the Bulletin 100-D contactors like the 100-D420EZY00 contactor is 600 Volts per the UL/CSA standards and 1000 Volts per the IEC standard. These contactors have a rated impulse voltage withstand of 12 kilovolts. The Bulletin 100-D contactors like the 100-D420EZY00 contactor should be used at installation site altitudes that are less than 2000 meters above sea level and at ambient temperatures between -25 and 60 degrees Celsius. If the temperature of the surrounding air goes up to 70 degrees Celsius, then the current carrying capability of the contactor reduces by 15%.



The current rating of the Allen-Bradley 100-D420EZY00 Bulletin 100-D contactor is 420 Amps. It is controlled by an electronic control coil with a 48 to 72 Volts DC voltage range. The coil on the 100-D420EZY00 contactor comes with a built-in electronic interface. The lifespan of the 100-D420EZY00 contactor is 10 million operations (mechanical) and 1 million operations (electrical). The Bulletin 100-D contactor series supports optional auxiliary contacts, but none are available on the 100-D420EZY00 contactor. It has 3 poles which are its main contacts and it only supports panel mounting. Depending on the application requirements, it can be mounted with a tilt of as much as +/-25 degrees. The contactor can also be mounted so that it can be rotated by as much as +/-90 degrees (clockwise or counterclockwise) from the standard vertical position. Only trained technicians should install the device.



Repair Services for 100-D420EZY00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZY00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D420EZY00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D420EZY00

Resolutions For 100-D420EZY00

About

Technical Specifications for 100-D420EZY00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZY00
Product TypeContactor
Poles3
Current Rating420 Amps
Coil TypeElectronic
Control Voltage48 to 72 Volts DC
Protection RatingIP 00
Auxiliary Contacts0
Operating Temperature-25 to 60 degrees Celsius
Mechanical Lifespan10 million
Electrical Lifespan1 million
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D420EZY00
Product TypeContactor
Poles3
Current Rating420 Amps
Coil TypeElectronic
Control Voltage48 to 72 Volts DC
Protection RatingIP 00
Auxiliary Contacts0
Operating Temperature-25 to 60 degrees Celsius
Mechanical Lifespan10 million
Electrical Lifespan1 million

About 100-D420EZY00

The Allen-Bradley 100-D420EZY00 contactor is a large contactor that belongs to the Bulletin 100-D series of IEC contactors. This series of contactors made by Allen-Bradley complies with standards such as the CSA 22.2 and UL 508 standards, and it is certified by the CE, CCC, and cULus standards. The rated isolation voltage for the Bulletin 100-D contactors like the 100-D420EZY00 contactor is 600 Volts per the UL/CSA standards and 1000 Volts per the IEC standard. These contactors have a rated impulse voltage withstand of 12 kilovolts. The Bulletin 100-D contactors like the 100-D420EZY00 contactor should be used at installation site altitudes that are less than 2000 meters above sea level and at ambient temperatures between -25 and 60 degrees Celsius. If the temperature of the surrounding air goes up to 70 degrees Celsius, then the current carrying capability of the contactor reduces by 15%.



The current rating of the Allen-Bradley 100-D420EZY00 Bulletin 100-D contactor is 420 Amps. It is controlled by an electronic control coil with a 48 to 72 Volts DC voltage range. The coil on the 100-D420EZY00 contactor comes with a built-in electronic interface. The lifespan of the 100-D420EZY00 contactor is 10 million operations (mechanical) and 1 million operations (electrical). The Bulletin 100-D contactor series supports optional auxiliary contacts, but none are available on the 100-D420EZY00 contactor. It has 3 poles which are its main contacts and it only supports panel mounting. Depending on the application requirements, it can be mounted with a tilt of as much as +/-25 degrees. The contactor can also be mounted so that it can be rotated by as much as +/-90 degrees (clockwise or counterclockwise) from the standard vertical position. Only trained technicians should install the device.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZY00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D420EZY00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF