Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D630EN11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D630EN11

|
Need a Specific Revision?

The 100-D630EN11 contactor is a 3-pole AC contactor from Allen-Bradley. The 100-D630EN11 contactor has 2 factory-supplied side-mounted auxiliary contacts and an AC-operated electronic coil with an integrated PLC interface. The 100-D630EN11 contactor has a high-breaking rating of 630 Amps and a rated operating voltage range of 230 to 1000 Volts AC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D630EN11

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D630EN11
Weight32.00 lbs (14.51 kg)
DescriptionAC-Operated Contactor
Voltage Range230 to 600 Volts AC
Current Rating630 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage380 to 415 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Maximum Protection ClassIP 20 (with a Terminal Block)
Request a Repair

The Allen-Bradley 100-D630EN11 Bulletin 100-D contactor has a high breaking current capacity and a wide operating voltage range to accommodate a wide range of applications. It has a rated operating current of 630 Amps (AC-3) at 415 Volts AC and 800 Amps (AC-1) at 690 Volts AC. The 100-D630EN11 contactor also has a rated switching power of 350 kilowatts at 415 Volts AC and 500 kilowatts at 500 Volts AC. It has a rated acceptable operating motor voltage range of 230 Volts AC to 1000 Volts AC at 50/60 Hertz frequency. The 100-D630EN11 contactor has an AC-actuated electronic coil with an integrated PLC interface. This coil has a rated drop-out voltage range of -3 to 5 Volts DC and a rated pick-up voltage range of 13 to 30 Volts DC. This coil also has a rated signal voltage rating of 24 Volts DC at 15 milliamps, which is suitable for a direct PLC connection without interposing relay circuits.

The Allen-Bradley 100-D630EN11 Bulletin 100-D series contactor has a rated coil voltage of 380 Volts AC to 415 Volts AC at 50/60 Hertz rated coil frequency. The 100-D630EN11 contactor features a Class B coil insulation class that offers thermal stability at up to 130 degrees Celsius at the full power ratings. The 100-D630EN11 contactor has a rated isolation voltage (Ui) of 1000 Volts AC (per the IEC standards) and a maximum voltage impulse withstand of 12 kilowatts. The 100-D630EN11 contactor has 3 normally open main circuit contacts (L1 through L3) for the wiring of the main circuit and 2 side-mounted auxiliary contacts (1 NO and 1 NC) for feedback wiring. The 100-D630EN11 contactor has flat-end line side terminals and it supports a bolt-in type of connection.