Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D860EB00

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D860EB00

|
Need a Specific Revision?

The Allen-Bradley 100-D860EB00 Bulletin 100-D IEC contactor uses a coil voltage range of 440 to 480 Volts AC at a frequency of 50 to 60 Hertz. This contactor does not include auxiliary contacts, but these can be selected from the accessories catalog if required. The maximum operating temperature rating for this contactor at full power is 60 degrees Celsius.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D860EB00

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D860EB00
Weight32.00 lbs (14.51 kg)
Type of ComponentContactor
Operating ModeNon-Reversing
Poles3
Coil Voltage TypeStandard AC
Coil Voltage Rating440-480V AC
Frequency50-60 Hz
Current at 40 degrees Celsius1000 Amps
Current at 60 degrees Celsius860 Amps
Auxiliary ContactsNone
PLC InterfaceOptional
Request a Repair

The 100-D860EB00 contactor is an Allen-Bradley  IEC contactor that operates with a non-reversing mechanism only. This means it can only be used with non-reversing motors. This contactor has been designed to operate with heavy-duty and load-bearing equipment such as industrial AC motors. It has been included in the Bulletin 100-D series of IEC contactors that are manufactured by Allen-Bradley/Rockwell Automation. This contactor comes with electric coils and 3 poles that are its main contacts and that are used for performing a switching action that will limit or increase the levels of power that are being provided to the connected equipment. Electronically controlled coils can reduce the required pick-up current and they include a built-in surge suppression feature for protection. The Allen-Bradley 100-D860EB00 IEC contactor has a current rating of 860 Amps at 60 degrees Celsius and a current rating of 1000 Amps at 40 degrees Celsius. These are among the highest current ratings supported in the Bulletin 100-D series.

The Allen-Bradley 100-D860EB00 Bulletin 100-D series IEC contactor employs a coil voltage range of 440 to 480 Volts AC and a corresponding frequency range of 50 to 60 Hertz. This voltage is a standard AC voltage that allows the coils to support an electronic interface that contributes to the functioning of the electric coils and that allows for advanced contactor and system control. The Allen-Bradley 100-D860EB00 IEC contactor does not include any built-in auxiliary contacts but these can be selected from the Bulletin 100-D accessories catalog to improve the contactor’s performance. Once auxiliary contacts are added, they can operate with a feature that is called the mirror contact performance if 1 auxiliary contact is normally open and the other is normally closed. The mirror contact performance includes the isolation of the normally closed contact and it keeps that contact closed regardless of the status of all the power poles. The contactor can be mounted on a panel, and it does not require a lot of space since it has a compact design.