100-D860ED00

The Allen-Bradley 100-D860ED00 contactor is a Bulletin 100-D 3-phase contactor that is built for high load or high current applications. The Bulletin 100-D series contactors like this one feature a space-saving design with reduced weight and dimensions to save needed panel space in industrial systems. They also feature low switching ratings to save energy. The 100-D860ED00 contactor is supplied as a completely assembled basic contactor without auxiliary contacts. The operators can add up to 4 side-mounted normally open or normally closed auxiliary contacts to this contactor for feedback wiring purposes. The 100-D860ED00 contactor is supplied with 3 normally open contacts as the main power contacts. These contacts have flat-end terminals that support bolt-in connections to the main power circuit. The 100-D860ED00 contactor has both a main power circuit and a smaller control circuit. The control circuit is actuated by an AC voltage line that is wired directly to the coil contacts A1 and A2.

The Allen-Bradley 100-D860ED00 Bulletin 100-D 3-phase contactor has an electronic AC coil. The coil features low switching power ratings of 24 Volts DC or 15 milliamps for direct connection to a PLC. The 100-D860ED00 contactor's coil has a rated pickup voltage range of 13 to 30 Volts DC and a nominal dropout range of -5 to 5 Volts DC. The 100-D860ED00 contactor has 2 operating modes that can be selected by using a black jumper switch. The default operating mode is the normal E mode, while the selectable EI mode is the PLC interface mode. The 100-D860ED00 contactor is meant to be wired directly to a 3-phase AC power source via its 3 main power poles that are labeled as L1, L2, and L3. The 100-D860ED00 contactor has a rated breaking current of 860 Amps.