Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D860ED11-X10

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D860ED11-X10

|
Need a Specific Revision?

The 100-D860ED11-X10 contactor is a 3-pole non-reversing contactor from the Allen-Bradley Bulletin 100-D contactor series. The 100-D860ED11-X10 contactor is supplied with a stand-alone normally open auxiliary contact block, 2 side-mounted auxiliary contacts, and a DC-operated electronic coil with an interface. The 100-D860ED11-X10 contactor has a rated breaking current of 860 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D860ED11-X10

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D860ED11-X10
Weight32.00 lbs (14.51 kg)
DescriptionDC-Operated Contactor
Current Rating860 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage110 to 130 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Protection ClassIP 20 (with a Terminal Block)
Request a Repair

The Allen-Bradley 100-D860ED11-X10 IEC contactor is a compact and rugged industrial contactor that has been designed for cost-effective switching functions in large-frame industrial applications. The 100-D860ED11-X10 contactor is a complete factory-assembled contactor that is available from the Allen-Bradley Bulletin 100-D contactors series. The  100-D860ED11-X10 contactor features several factory-installed options that include 2 side-mounted auxiliary contacts, a stand-alone normally open auxiliary contact block(for additional wiring, 3 standard normally open contacts for connecting to a power source, and an integrated surge suppression circuit for protection against high voltage conditions. The side-mounted auxiliary contacts have a snap-in design that allows for quick and easy mounting without specialized tools. Up to 2 additional auxiliary contacts can be added to the contactor to meet certain application specifications. The Bulletin 100-D series offers a complete range of accessories and renewal parts to extend the lifespan and expand the functionalities of the 100-D860ED11-X10 contactor.

The Allen-Bradley 100-D860ED11-X10 Bulletin 100-D contactor features a low-power switching electronic AC coil that it uses for driving contacts. This coil has a nominal switching signal voltage rating of 24 Volts DC at a current rating of 15 milliamps. It supports 2 operational modes. These 2 operating modes are the normal operating mode or E mode, which is the default mode, and the electronic interface mode or the EI mode, which is the PLC interface mode. The operators can switch between these 2 modes by using the factory-supplied black jumper switch that is located on the top of the contactor. When the standard E mode is selected, the contactor is wired and controlled via the A1 and A2 terminals. The coil mechanism can be controlled with 110 to 130 Volts AC signal voltage and 50 to 60 Hertz frequency. When the PLC EI mode is selected, the coil is wired and controlled from a 24 Volts DC low-level signal power source that is wired to the B1 and B2 terminals.