The part number 100-D860EG11 is the catalog number for an Allen-Bradley 3-pole contactor with auxiliary contacts. The 100-D860EG11 contactor belongs to the Bulletin 100-D compact IEC contactor family. The Bulletin 100-D contactors are built with compact footprints with significantly reduced dimensions and weight to save panel space. The Bulletin 100-D contactors also support minimal energy consumption to save operation costs. The 100-D860EG11 contactor features 2 side-mounted auxiliary contacts and 3 standard normally open main power contacts. These auxiliary contacts feature snap-in installation for easy and convenient mounting on the contactor, and they are supplied as a factory-installed option. Up to 2 additional contact blocks can be ordered to meet application specifications. The 100-D860EG11 contactor supports a wide range of accessories and renewal parts. Optional terminals, terminal lugs, terminal covers, and mounting plates can also be added to simplify the installation and wiring processes.

The Allen-Bradley 100-D860EG11 Bulletin 100-D contactor is factory-fitted with an AC-operated electronic coil that has a PCB for supporting a PLC interface. This coil has 2 power terminals and additional PLC terminals that are labeled A1 and A2 and B1 and B2, respectively. It has a rated coil voltage of 200 to 220 Volts AC and a nominal signal voltage rating of 24 Volt DC at 15 milliamps of current. The 100-D860EG11 contactor has 2 operational modes. The standard E mode is the default electronic operating mode for the coil, while the EI mode is the PLC interface mode for PLC integration. Switching between modes is done by using a black jumper on top of the contactor. The contactor's operating temperature range is from -25 to 60 degrees Celsius.