Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D860EN11-X10

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D860EN11-X10

|
Need a Specific Revision?

The Allen-Bradley 100-D860EN11-X10 IEC contactor is a Bulletin 100-D 3-phase, non-reversing contactor with an electronic coil and an interface. This contactor comes with 2 side-mounted auxiliary contacts and with an integrated PLC interface. The 100-D860EN11-X10 contactor has an operating current rating of 860 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D860EN11-X10

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D860EN11-X10
Weight32.00 lbs (14.51 kg)
DescriptionAC-Operated Contactor
Current Rating860 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage380 to 415 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsYes
Protection ClassIP 20 (with a Terminal Block)
Request a Repair

The 100-D860EN11-X10 large-frame IEC contactor from Allen-Bradley is a non-reversing AC contactor from the Bulletin 100-D contactor series. This contactor features a built-in electronic coil interface that accurately and reliably drives the contactor's contacts. This contactor offers 2 user-selectable operating modes. The E mode is the standard operating mode where the coil functions are controlled directly from the A1 and A2 coil contacts. The EI interface mode is the PLC interface operating mode where the coil control functions are programmed directly from a PLC system or an HMI device. In both modes, the control voltage is wired directly to the A1 and A2 terminals. The 100-D860EN11-X10 contactor has a rated control voltage range of 380 to 415 Volts AC. It also has a rated nominal signal voltage rating of 24 Volts DC (at 15 milliamps) and a rated pickup voltage range of 13 to 30.2 Volts DC.

The Allen-Bradley 100-D860EN11-X10 Bulletin 100-D non-reversing AC contactor features several factory-installed options such as a stand-alone normally open auxiliary contact block, 2 side-mounted auxiliary contacts (1 normally open contact and 1 normally closed contact), 3 normally open main circuit contacts, and flat-end line-side terminals for quick field wiring. Each side-mounted auxiliary contact has a sidebar connector that supports snap-in installation without rewiring the whole contactor. The 100-D860EN11-X10 contactor supports a wide range of field-installable accessories and parts. The operators can easily order renewal kits and accessories from the Bulletin 100-D series to expand the contactor’s application functions. The 100-D860EN11-X10 contactor has an IP 20 protection rating when it is used with a terminal block, and it is designed to operate within a temperature range of -25 to 60 degrees Celsius without de-rating.