100-D95EA11

The 100-D95EA11 contactor is a three-pole contactor that comes in the Bulletin 100-D IEC series by Allen-Bradley. This contactor has been designed specifically to provide high thermal and switching capabilities to heavy-duty industrial equipment such as electromechanical motors. One of the main functions of this contactor is to provide reliable operations and a long operating life without the need for specialized environments or hardware. The Allen-Bradley 100-D95EA11 three-pole contactor includes electronically controlled coils that can support a PLC interface that will provide the contactor with additional and advanced control functions. If a PLC interface is ordered for the contactor, it is mandatory for it to be used. If the PLC is not necessary, it must not be ordered. This contactor includes 3 main contacts and 2 auxiliary contacts.

The Allen-Bradley 100-D95EA11 Bulletin 100-D series three-pole contactor operates with a current consumption rating of 95 Amps that is calculated at a temperature of 60 degrees Celsius. This temperature must not be exceeded if the current is to remain constant, and if the temperature is between 60 and 70 degrees Celsius, it is necessary to derate the contactor to match the environmental conditions. This contactor can be installed in almost any environment since its materials are durable and will not cause harm to the environment. It has been designed with compact dimensions that enable it to fit into tight spaces. It is recommended to ground the Allen-Bradley 100-D95EA11 three-pole contactor to avoid electromagnetic interference during operation. The coil voltage applied to the contactor must not exceed the voltage range of 208 to 277 Volts AC. This voltage is used with a frequency range of 50 to 60 Hertz.