Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D95EN00

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D95EN00

|
Need a Specific Revision?

The 100-D95EN00 Bulletin 100-D IEC contactor from Allen-Bradley is designed for a wide range of electrical applications. The 100-D95EN00 contactor features an electronic AC-actuated coil with an integrated PLC interface. It has a maximum carrying current of 95 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D95EN00

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D95EN00
Weight3.00 lbs (1.36 kg)
DescriptionAC-Operated Contactor
Current Rating95 Amps
Coil TypeStandard AC Electronic Coil
Coil Voltage380 to 500 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary ContactsNone
Protection ClassIP 20 (with a Terminal Block)
Request a Repair

The Allen-Bradley 100-D95EN00 Bulletin 100-D contactor features 2 user-selectable operating modes (the standard E mode and the EI mode). These modes are selectable with a jumper. The 100-D95EN00 contactor also comes with an electronic coil with an interface that can be actuated with AC voltage. The control voltage range for the coil is between 380 Volts AC and 500 Volts AC. The 100-D95EN00 contactor’s coil has 2 primary contacts (A2 and A1) to which the control voltage source is connected. Additional B1 and B2 terminals are also provided for connecting to 24 Volts DC signals from the PLC interface. When the E operating mode is selected, the coil is connected and controlled by using the A2 and A1 terminals. The B2 and B1 terminals are inactive in this mode.

When the EI mode is selected on the Allen-Bradley 100-D95EN00 Bulletin 100-D contactor, the basic contactor functions such as switching on and off are controlled from the 24 Volts DC signal level source. Terminals A2 and A1 are also wired to the control voltage in the same manner as the conventional coil, while terminals B2 and B1 are wired to a 24 Volts DC control signal from a PLC for energizing the contacts. Note that 15 milliamps of current are required to drive the B1 and B2 terminals. The 100-D95EN00 contactor can be wired directly to a 3-phase power source. The main circuit contacts (L1, L2, and L3) are provided for connecting the whole contactor to the main power supply. Optional snap-in auxiliary contact blocks can be added to make the feedback wiring process easier. The 100-D95EN00 contactor has a maximum carrying current rating of 95 Amps.