100-D95EZD11

The 100-D95EZD11 contactor operates with 95 Amps of rated current. It is designed and manufactured by Allen-Bradley. This contactor is part of the Allen-Bradley Bulletin 100-D IEC contactors product line. The 100-D95EZD11 contactor is controlled by a 110 to 130 Volts DC rated electronic coil. The coil on the contactor has an integrated electronic interface. The contactor features 2 auxiliary contacts. An auxiliary contact is a contact in the auxiliary circuit that is operated mechanically. The 2 auxiliary contacts are linked to the 3 main contacts and they activate at the same time as the main contacts. An auxiliary contact is also known as a supplementary contact or a control contact. One of the auxiliary contacts on the 100-D95EZD11 contactor is a normally-closed contact and the other is a normally-open contact.

The Allen-Bradley 100-D95EZD11 Bulletin 100-D contactor has a 1000 Volts isolation voltage rating per the IEC standards and a 600 Volts isolation voltage rating per the UL/CSA standards. Allen-Bradley recommends a -25 to 60 degrees Celsius operating temperature range for the Bulletin 100-D contactors. The current rating of 95 Amps for the 100-D95EZD11 contactor is valid for the temperature range mentioned above and it is valid for installation at altitudes of up to 2000 meters above sea level. The current carrying capacity of the 100-D95EZD11 contactor will be reduced if the device is operated outside these recommended limits. At 70 degrees Celsius, the current will reduce by at least 15% to 80.75 Amps. The ingress protection rating of the contactor is IP 00, which means that the contactor is not protected against large quantities of dust or water. This also means that the contactor needs to be installed inside a cabinet for protection during operation.