Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D95J11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D95J11

|
Need a Specific Revision?

The 100-D95J11 contactor is manufactured by Allen-Bradley/Rockwell Automation in the Bulletin 100-D series. The unit has 3 main poles and 2 auxiliary contacts and it operates in a non-reversing manner only. The 100-D95J11 contactor comes with a conventional coil and it has a coil voltage rating of 24 Volts AC. The current rating of the contactor is 95 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D95J11

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D95J11
Weight8.44 lbs (3.83 kg)
Number of Poles3
OperationAC-Operated, Non-Reversing
Coil TypeConventional Coil
Current Rating95 Amps
AC Voltage Frequency60 Hertz
Ratings for switching AC motors at 230 Volts37 kilowatts
Ratings for switching AC motors at 400 Volts63 kilowatts
Ratings for switching AC motors at 415 Volts66 kilowatts
Ratings for switching AC motors at 500 Volts80 kilowatts
Ratings for switching AC motors at 690 Volts110 kilowatts
Ratings for switching AC motors at 1000 Volts63 kilowatts
Auxiliary Contacts1 N.O., 1 N.C.
Coil Voltage24 Volts
Request a Repair

The catalog number 100-D95J11 is the product code for a contactor that can control AC motors. The contactor is part of the Bulletin 100-D product series introduced by Allen-Bradley/Rockwell Automation. The 100-D95J11 contactor is a standard type of contactor that is intended for connections to 3-pole power sources with its 3 power contacts. The 100-D95J11 contactor also has 2 auxiliary contacts mounted on its sides for other types of connections. One auxiliary contact is normally closed and the other auxiliary contact is normally open and they are made to mirror each other during operation. The 100-D95J11 contactor can operate at full power at a maximum temperature of 60 degrees Celsius or 140 degrees Fahrenheit.

The Allen-Bradley/Rockwell Automation 100-D95J11 Bulletin 100-D contactor has an environmentally friendly design and it has compact dimensions like all the rest of the contactors and other components from the Bulletin 100-D contactor series. These contactors all have wide voltage ranges and they also have low power pick-up and hold-in capabilities to increase efficiency and to be environmentally friendly. The Bulletin 100-D contactors are also made out of environmentally friendly materials and several of their components can be replaced, which reduces waste and lowers costs. The 100-D95J11 contactor features a conventional type of coil with a rated coil voltage of 24 Volts AC at a rated frequency of 60 Hertz. This coil does not support an interface. The current rating of the contactor is 95 Amps. The 100-D95J11 contactor can operate with kilowatt and Horsepower output when it is used with AC motors.