100-D95KN11

The 100-D95KN11 contactor is an IEC contactor that comes in the Bulletin 100-D series of contactors that are manufactured by Allen-Bradley. This contactor can be used in applications that require a compact and flexible starter component. It comes in a compact design and it is suitable to be installed on a panel. The materials that are used in the manufacturing of this contactor are environmentally friendly. The Allen-Bradley 100-D95KN11 IEC contactor cannot support an integrated PLC interface for advanced control options because it uses conventional coils, not electronic coils. However, accessories such as terminal blocks and terminal lugs are available from the Bulletin 100-D accessories catalog. Although the installation process of the contactor is simple and does not require the use of additional and advanced tools, the wiring process must be done carefully to guarantee proper functioning and safe operations.

The Allen-Bradley 100-D95KN11 Bulletin 100-D IEC contactor operates with a conventional type of coil that can provide low power pick-up and hold-in ratings. The contactor’s conventional coils operate with the contactor’s 3 main poles and with its 2 auxiliary contacts. Additional auxiliary contacts can also be selected from the accessories catalog and installed as well. The conventional contacts used by this contactor are gold-plated and they are suitable for low-energy applications or feedback applications. The Allen-Bradley 100-D95KN11 IEC contactor has a current consumption rating of 95 Amps at 60 degrees Celsius. If the contactor is used at a lower temperature, the current consumption rating can be increased. This contactor is non-reversing and this means that the equipment that is going to be used with it needs to be non-reversing as well.