Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-E09EJ01

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-E09EJ01

|
Need a Specific Revision?

The Allen-Bradley 100-E09EJ01 Contactor is a DIN Rail-mounted, coil-controlled contactor from the Allen-Bradley IEC 100 Contactors series. The 100-E09EJ01 Contactor has a rated switching current of 9 Amps and 3 poles. It supports a PLC interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-E09EJ01

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-E09EJ01
Weight15.00 lbs (6.80 kg)
DescriptionDC-Operated Contactor
Current Rating9.0 Amps
Coil TypeStandard DC
Coil Voltage20 to 60 Volts DC
PLC InterfaceYes
Number of Poles3
Terminal TypeScrew Type
Auxiliary Contact1 Normally Closed (NC)
Protection ClassIP2X
Request a Repair

The 100-E09EJ01 3-Pole Contactor is a DC operated, direct-on-line contactor. The 100-E09EJ01 Contactor belongs to the Allen-Bradley Bulletin 100-E contactor family in the IEC 100 Contactors series. This contactor supports cost-effective electric switching because of its significantly reduced weight and dimensions which save panel space and reduce operation costs. The 100-E09EJ01 Contactor has a low-power-consumption electronic coil with a PLC interface for remote applications. It also features a wide operating voltage range, low holding and pick-up times, direct on-line connectivity (without additional interposing relays), a line of accessories for special applications, and an environmentally friendly design. The 100-E09EJ01 Contactor has 3 main contacts and 1 Normally Closed (NC) auxiliary contact.

The Allen-Bradley Bulletin 100-E 100-E09EJ01 Contactor coil has an operating voltage range of 20 to 60 Volts DC and an insulation class of Class F according to the IEC standards. The 100-E09EJ01 Contactor has an operating current rating of 9 Amps at 400 Volts input voltage and a maximum switching power rating of 5.5 kilowatts at 690 Volts AC input voltage. It has an operating voltage range of 220 Volts AC to 575 Volts AC (at 50/60 Hertz) or 24 Volts DC to 440 Volts DC. The 100-E09EJ01 Contactor has a UL/CSA rated isolation voltage rating of 600 Volts AC and a rated impulse voltage withstand rating of 6 Kilovolts. The 100-E09EJ01 Contactor has an IP2X environmental protection rating. It also has a rated operating temperature range of -40 degrees Celsius to 70 degrees Celsius and a maximum tolerable installation elevation of 3,000 meters.