Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-E09EJ400

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-E09EJ400

|
Need a Specific Revision?

The Allen-Bradley 100-E09EJ400 Contactor is a DIN Rail-mounted and coil controlled contactor. The 100-E09EJ400 Contactor has a rated switching current of 9 Amps and 4 poles. It has an IP2X protection rating and an AC/DC coil.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-E09EJ400

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-E09EJ400
Weight2.00 lbs (0.91 kg)
DescriptionAC/DC-Operated Contactor
Current Rating9 Amps
Coil TypeStandard AC/DC
Coil Voltage20 to 60 Volts DC/24 to 60 Volts AC
PLC InterfaceYes
Number of Poles4 Poles (NO)
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
Request a Repair

The 100-E09EJ400 Contactor is a 4-pole AC/DC-operated, direct-on-line contactor from the Allen-Bradley Bulletin 100E/104E line within the IEC 100 Contactors series. The Bulletin 100E contactors like this one features a small space-saving design that saves panel space and that is ideal in tight-space applications. They also feature universal AC/DC electronic coils of all sizes to meet the demands of most industrial applications. The 100-E09EJ400 Contactor has a 4-pole wiring design and screw-type terminals for simplified wiring. It has 4 main pole contacts that are 4 Normally Open (NO) contacts. The 100-E09EJ400 Contactor is designed for tough industrial conditions, and it is built to withstand standard industrial operating shocks.

The 100-E09EJ400 Contactor has a rated operating current of 9 Amps and a power rating of 5.5 Kilowatts for switching AC motors (AC-2 and AC-3 motors). The 100-E09EJ400 Contactor also has a voltage range of 24 Volts DC to 440 Volts DC or 115 Volts AC to 575 Volts AC at 50/60 Hertz. The 100-E09EJ400 Contactor has a rated isolation voltage of 690 Volts AC and a maximum impulse withstand rating of 6000 Volts. It has a standard low-consumption AC/DC electronic coil type with a PLC interface. This coil comes with IEC rated Class F insulation, and it has an operating voltage range of 20 to 60 Volts DC and 24 to 60 Volts AC at 50/60 Hertz coil frequency. The 100-E09EJ400 Contactor has an ambient operating temperature range of -40 to 70 degrees Celsius. It comes with an IP2X ingress protection rating. The 100-E09EJ400 Contactor is designed for installation at a maximum altitude of 3000 meters.