100-E09KD10 | Allen Bradley PLC IEC 100 Contactors

100-E09KD10

100-E09KD10

Description:

The 100-E09KD10 contactor is an industrial contactor manufactured by Allen-Bradley/Rockwell Automation. This 3-pole contactor variant is part of the IEC 100-E/104-E series and it features direct-on-line operation. The 100-E09KD10 contactor has a coil voltage range of 100 to 250 Volts AC/DC and it features 1 N.O. auxiliary contact. The rated isolation voltage is 600 to 690 Volts and the rated current is 9 to 25 Amps.

Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E09KD10

Add more parts to quote

Description:

The 100-E09KD10 contactor is an industrial contactor manufactured by Allen-Bradley/Rockwell Automation. This 3-pole contactor variant is part of the IEC 100-E/104-E series and it features direct-on-line operation. The 100-E09KD10 contactor has a coil voltage range of 100 to 250 Volts AC/DC and it features 1 N.O. auxiliary contact. The rated isolation voltage is 600 to 690 Volts and the rated current is 9 to 25 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E09KD10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 100-E09KD10

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KD10
Number of Poles3
TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 400 Volts (AC-3)9 Amps
Rated Operational Current at 690 Volts (AC-1)25 Amps
Coil Voltage100 to 250 Volts AC/DC
KiloWatt Power Rating at 220 to 240 Volts2.2 kiloWatts
KiloWatt Power Rating at 380 to 400 Volts4 kiloWatts
KiloWatt Power Rating at 415 and 440 Volts4 kiloWatts
KiloWatt Power Rating at 500 and 690 Volts5.5 kiloWatts
Horsepower Power Rating at 200 and 230 Volts2 Horsepower
Horsepower Power Rating at 460 Volts5 Horsepower
Horsepower Power Rating at 575 Volts7.5 Horsepower
Auxiliary Contacts1 N.O.
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KD10
Number of Poles3
TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 400 Volts (AC-3)9 Amps
Rated Operational Current at 690 Volts (AC-1)25 Amps
Coil Voltage100 to 250 Volts AC/DC
KiloWatt Power Rating at 220 to 240 Volts2.2 kiloWatts
KiloWatt Power Rating at 380 to 400 Volts4 kiloWatts
KiloWatt Power Rating at 415 and 440 Volts4 kiloWatts
KiloWatt Power Rating at 500 and 690 Volts5.5 kiloWatts
Horsepower Power Rating at 200 and 230 Volts2 Horsepower
Horsepower Power Rating at 460 Volts5 Horsepower
Horsepower Power Rating at 575 Volts7.5 Horsepower
Auxiliary Contacts1 N.O.
s

About 100-E09KD10

The contactor component with the catalog number 100-E09KD10 is designed and produced by Allen-Bradley/Rockwell Automation and it is available through the Allen-Bradley IEC 100-E/104-E series. The unit has 3 poles and it features one normally open auxiliary contact. Additionally, the product code of the 100-E09KD10 contactor provides basic information about the part and its specifications. However, the codes for coil voltage of the unit are specified in a separate table in the technical data provided by the manufacturer. The 100-E09KD10 contactor has a rated coil voltage of 100 to 250 Volts AC/DC. The IEC 100-E/104-E series provides a wide range of contactors like the 100-E09KD10 contactor that are made to be installed in compact and cost-effective housings. These contactors are designed for flexibility and they are compatible with a variety of accessories.



 



The Allen-Bradley/Rockwell Automation 100-E09KD10 contactor is a direct-on-line type of starter but the IEC 100 series also offers reversing types of starters. The 100-E09KD10 contactor has a rated isolation voltage of 690 Volts according to the IEC standards and it has a rated isolation voltage of 600 Volts according to the UL and CSA standards. Depending on the voltage, the 100-E09KD10 contactor has a rated operational current of 9 to 25 Amps. The unit also has a 5 Horsepower output power rating at a voltage rating of 460 Volts and a 7.5 Horsepower output power rating at a voltage rating of 575 Volts. In addition to that, the unit has 2.2 to 5.5 kiloWatts of output power ratings at different voltage ratings. The supported voltages ratings are 220 to 240 Volts, 380 to 400 Volts, 415 Volts, 440 Volts, 500 Volts, and 690 Volts.



Repair Services for 100-E09KD10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KD10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E09KD10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E09KD10

Resolutions For 100-E09KD10

About

Technical Specifications for 100-E09KD10

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KD10
Number of Poles3
TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 400 Volts (AC-3)9 Amps
Rated Operational Current at 690 Volts (AC-1)25 Amps
Coil Voltage100 to 250 Volts AC/DC
KiloWatt Power Rating at 220 to 240 Volts2.2 kiloWatts
KiloWatt Power Rating at 380 to 400 Volts4 kiloWatts
KiloWatt Power Rating at 415 and 440 Volts4 kiloWatts
KiloWatt Power Rating at 500 and 690 Volts5.5 kiloWatts
Horsepower Power Rating at 200 and 230 Volts2 Horsepower
Horsepower Power Rating at 460 Volts5 Horsepower
Horsepower Power Rating at 575 Volts7.5 Horsepower
Auxiliary Contacts1 N.O.
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KD10
Number of Poles3
TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 400 Volts (AC-3)9 Amps
Rated Operational Current at 690 Volts (AC-1)25 Amps
Coil Voltage100 to 250 Volts AC/DC
KiloWatt Power Rating at 220 to 240 Volts2.2 kiloWatts
KiloWatt Power Rating at 380 to 400 Volts4 kiloWatts
KiloWatt Power Rating at 415 and 440 Volts4 kiloWatts
KiloWatt Power Rating at 500 and 690 Volts5.5 kiloWatts
Horsepower Power Rating at 200 and 230 Volts2 Horsepower
Horsepower Power Rating at 460 Volts5 Horsepower
Horsepower Power Rating at 575 Volts7.5 Horsepower
Auxiliary Contacts1 N.O.

About 100-E09KD10

The contactor component with the catalog number 100-E09KD10 is designed and produced by Allen-Bradley/Rockwell Automation and it is available through the Allen-Bradley IEC 100-E/104-E series. The unit has 3 poles and it features one normally open auxiliary contact. Additionally, the product code of the 100-E09KD10 contactor provides basic information about the part and its specifications. However, the codes for coil voltage of the unit are specified in a separate table in the technical data provided by the manufacturer. The 100-E09KD10 contactor has a rated coil voltage of 100 to 250 Volts AC/DC. The IEC 100-E/104-E series provides a wide range of contactors like the 100-E09KD10 contactor that are made to be installed in compact and cost-effective housings. These contactors are designed for flexibility and they are compatible with a variety of accessories.



 



The Allen-Bradley/Rockwell Automation 100-E09KD10 contactor is a direct-on-line type of starter but the IEC 100 series also offers reversing types of starters. The 100-E09KD10 contactor has a rated isolation voltage of 690 Volts according to the IEC standards and it has a rated isolation voltage of 600 Volts according to the UL and CSA standards. Depending on the voltage, the 100-E09KD10 contactor has a rated operational current of 9 to 25 Amps. The unit also has a 5 Horsepower output power rating at a voltage rating of 460 Volts and a 7.5 Horsepower output power rating at a voltage rating of 575 Volts. In addition to that, the unit has 2.2 to 5.5 kiloWatts of output power ratings at different voltage ratings. The supported voltages ratings are 220 to 240 Volts, 380 to 400 Volts, 415 Volts, 440 Volts, 500 Volts, and 690 Volts.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KD10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KD10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF