100-E09KJ200 | Allen Bradley PLC IEC 100 Contactors

100-E09KJ200

100-E09KJ200

Description:

The 100-E09KJ200 contactor is a large frame IEC 100 series contractor from Allen-Bradley. It has an operating current rating of 9 Amps. It has a control voltage range of 24 to 60 Volts AC/20 to 60 DC and comes with 2 N.O. and 2 N.C. main contacts.

Rated 4.8 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E09KJ200

Add more parts to quote

Description:

The 100-E09KJ200 contactor is a large frame IEC 100 series contractor from Allen-Bradley. It has an operating current rating of 9 Amps. It has a control voltage range of 24 to 60 Volts AC/20 to 60 DC and comes with 2 N.O. and 2 N.C. main contacts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E09KJ200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 15 reviews

    Technical Specifications for 100-E09KJ200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KJ200
DescriptionLarge Frame IEC Contactor
SeriesIEC 100 Contactors
Current Rating9 Amps
Coil TypeElectronic Coil
Coil Voltage TypeAC/DC
Control Voltage24-60V AC, 20-60V DC
Operating Frequency 50/60 Hz
Auxiliary ContactsNone
Main Contacts2 N.O., 2 N.C.
Utilization CategoryAC-3 Duty
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KJ200
DescriptionLarge Frame IEC Contactor
SeriesIEC 100 Contactors
Current Rating9 Amps
Coil TypeElectronic Coil
Coil Voltage TypeAC/DC
Control Voltage24-60V AC, 20-60V DC
Operating Frequency 50/60 Hz
Auxiliary ContactsNone
Main Contacts2 N.O., 2 N.C.
Utilization CategoryAC-3 Duty
s

About 100-E09KJ200

The 100-E09KJ200 contractor is a large frame type of IEC 100 series contractor that has been manufactured by Allen-Bradley-Rockwell Automation. It is an IEC 100 standard contractor from Allen-Bradley's extensive line of contactor systems, and it is part of the Bulletin 100-E contactor product line within the IEC 100 series. This compact IEC contactor has a variety of features, including support for a 140MG circuit breaker for motor protection. The 100-E09KJ200 contractor has been redesigned with a narrower profile than previous contactor models to save panel space. It has universal electronic AC and DC coils with a wide voltage range, as well as an optional interface that is compatible with a programmable logic controller or PLC.



 



The Bulletin 100-E series 100-E09KJ200 contractor is designed to be compact, modular, and incredibly versatile. This contactor has an operating current rating of 9 Amps. The unit meets the IEC standards and belongs to the AC3 utilization category, which means it is designed to withstand high current levels continuously. The electronic coil has a DC voltage range of 20 to 60 Volts DC and an AC control voltage range of 24 to 60 Volts AC, with an operating frequency of 50 to 60 Hertz. The 100-E09KJ200 contractor has 2 N.O. (Normally Open) and 2 N.C. (Normally Closed) main poles. The device is IEC, UL, and CSA certified, as well as RoHS compliant. It has a small form factor, with 25% less width and 50% less weight than its 100-D counterpart. Its eco-friendly design reduces power consumption by up to 65% while producing less heat and remaining quiet during operation. Surge protection is built in to protect it against unexpected high voltages. It comes with a variety of accessories, including mechanical interlocks, terminal lugs, mounting plates, and connection bars.



Repair Services for 100-E09KJ200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E09KJ200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E09KJ200

Resolutions For 100-E09KJ200

About

Technical Specifications for 100-E09KJ200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KJ200
DescriptionLarge Frame IEC Contactor
SeriesIEC 100 Contactors
Current Rating9 Amps
Coil TypeElectronic Coil
Coil Voltage TypeAC/DC
Control Voltage24-60V AC, 20-60V DC
Operating Frequency 50/60 Hz
Auxiliary ContactsNone
Main Contacts2 N.O., 2 N.C.
Utilization CategoryAC-3 Duty
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09KJ200
DescriptionLarge Frame IEC Contactor
SeriesIEC 100 Contactors
Current Rating9 Amps
Coil TypeElectronic Coil
Coil Voltage TypeAC/DC
Control Voltage24-60V AC, 20-60V DC
Operating Frequency 50/60 Hz
Auxiliary ContactsNone
Main Contacts2 N.O., 2 N.C.
Utilization CategoryAC-3 Duty

About 100-E09KJ200

The 100-E09KJ200 contractor is a large frame type of IEC 100 series contractor that has been manufactured by Allen-Bradley-Rockwell Automation. It is an IEC 100 standard contractor from Allen-Bradley's extensive line of contactor systems, and it is part of the Bulletin 100-E contactor product line within the IEC 100 series. This compact IEC contactor has a variety of features, including support for a 140MG circuit breaker for motor protection. The 100-E09KJ200 contractor has been redesigned with a narrower profile than previous contactor models to save panel space. It has universal electronic AC and DC coils with a wide voltage range, as well as an optional interface that is compatible with a programmable logic controller or PLC.



 



The Bulletin 100-E series 100-E09KJ200 contractor is designed to be compact, modular, and incredibly versatile. This contactor has an operating current rating of 9 Amps. The unit meets the IEC standards and belongs to the AC3 utilization category, which means it is designed to withstand high current levels continuously. The electronic coil has a DC voltage range of 20 to 60 Volts DC and an AC control voltage range of 24 to 60 Volts AC, with an operating frequency of 50 to 60 Hertz. The 100-E09KJ200 contractor has 2 N.O. (Normally Open) and 2 N.C. (Normally Closed) main poles. The device is IEC, UL, and CSA certified, as well as RoHS compliant. It has a small form factor, with 25% less width and 50% less weight than its 100-D counterpart. Its eco-friendly design reduces power consumption by up to 65% while producing less heat and remaining quiet during operation. Surge protection is built in to protect it against unexpected high voltages. It comes with a variety of accessories, including mechanical interlocks, terminal lugs, mounting plates, and connection bars.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF