100-E09QJ01 | Allen Bradley PLC IEC 100 Contactors

100-E09QJ01

100-E09QJ01

Description:

The Allen-Bradley 100-E09QJ01 contactor is an IEC 100 3-pole contactor. It has a current rating of 9 Amps. The 100-E09QJ01 contactor has one normally-closed auxiliary contact.

Rated 5 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E09QJ01

Add more parts to quote

Description:

The Allen-Bradley 100-E09QJ01 contactor is an IEC 100 3-pole contactor. It has a current rating of 9 Amps. The 100-E09QJ01 contactor has one normally-closed auxiliary contact.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E09QJ01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 19 reviews

    Technical Specifications for 100-E09QJ01

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09QJ01
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
TerminalsScrew Type
Control Voltage24 Volts DC
Current Rating 9 Amps
Dimensions80 x 45 x 77 millimeters
Poles3
NC Auxiliary Contacts1
NO Auxiliary Contacts0
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09QJ01
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
TerminalsScrew Type
Control Voltage24 Volts DC
Current Rating 9 Amps
Dimensions80 x 45 x 77 millimeters
Poles3
NC Auxiliary Contacts1
NO Auxiliary Contacts0
s

About 100-E09QJ01

The 100-E09QJ01 contactor is a large contactor with screw terminals which is part of the IEC 100 Contactors and 100-E series of contactors from Allen-Bradley. The current rating for the contactor is 9 Amps for 3-phase AC input. The 100-E09QJ01 contactor features an electronic coil rated for 24 Volts DC. Features of the electronic coil include low power consumption and a fast drop out. Depending on the application requirements, electronic coils with different ratings can be ordered from Allen-Bradley to customize the contactor. The range of available coil ratings includes both AC and DC voltages such as 250 to 500 Volts AC/DC and 12 to 20 Volts DC. The 100-E09QJ01 contactor is a 3-pole contactor and it has one normally-closed auxiliary contact. Normally-open auxiliary contacts are not available on the 100-E09QJ01 contactor.



When the Allen-Bradley 100-E09QJ01 IEC 100 contactor is ordered with a PLC input, the PLC input must be used and not neglected. Accessories that can be ordered separately for use with the 100-E09QJ01 contactor include front-mounted auxiliary contact blocks, side-mounted auxiliary contact blocks, front-mounted auxiliary contact blocks made for severe industrial applications, side-mounted auxiliary contacts blocks with sequence terminal designations, side-mounted low-power auxiliary contact blocks with sequence terminal designations, mechanical interlocks, mechanical and electrical interlocks,  electronic timers, DC interface modules, mechanical latches, additional coil terminal blocks, protective covers, functional markers, terminal blocks, terminal shrouds, terminal lugs, paralleling terminals, terminal shrouds and shields, power wiring kits, mounting plates, connectors, and terminal accessories including terminal enlargements and terminal extensions. The 100-E09QJ01 contactor is certified by the CE, CCC, and EAC standards.



Repair Services for 100-E09QJ01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09QJ01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E09QJ01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E09QJ01

Resolutions For 100-E09QJ01

About

Technical Specifications for 100-E09QJ01

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09QJ01
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
TerminalsScrew Type
Control Voltage24 Volts DC
Current Rating 9 Amps
Dimensions80 x 45 x 77 millimeters
Poles3
NC Auxiliary Contacts1
NO Auxiliary Contacts0
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E09QJ01
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
TerminalsScrew Type
Control Voltage24 Volts DC
Current Rating 9 Amps
Dimensions80 x 45 x 77 millimeters
Poles3
NC Auxiliary Contacts1
NO Auxiliary Contacts0

About 100-E09QJ01

The 100-E09QJ01 contactor is a large contactor with screw terminals which is part of the IEC 100 Contactors and 100-E series of contactors from Allen-Bradley. The current rating for the contactor is 9 Amps for 3-phase AC input. The 100-E09QJ01 contactor features an electronic coil rated for 24 Volts DC. Features of the electronic coil include low power consumption and a fast drop out. Depending on the application requirements, electronic coils with different ratings can be ordered from Allen-Bradley to customize the contactor. The range of available coil ratings includes both AC and DC voltages such as 250 to 500 Volts AC/DC and 12 to 20 Volts DC. The 100-E09QJ01 contactor is a 3-pole contactor and it has one normally-closed auxiliary contact. Normally-open auxiliary contacts are not available on the 100-E09QJ01 contactor.



When the Allen-Bradley 100-E09QJ01 IEC 100 contactor is ordered with a PLC input, the PLC input must be used and not neglected. Accessories that can be ordered separately for use with the 100-E09QJ01 contactor include front-mounted auxiliary contact blocks, side-mounted auxiliary contact blocks, front-mounted auxiliary contact blocks made for severe industrial applications, side-mounted auxiliary contacts blocks with sequence terminal designations, side-mounted low-power auxiliary contact blocks with sequence terminal designations, mechanical interlocks, mechanical and electrical interlocks,  electronic timers, DC interface modules, mechanical latches, additional coil terminal blocks, protective covers, functional markers, terminal blocks, terminal shrouds, terminal lugs, paralleling terminals, terminal shrouds and shields, power wiring kits, mounting plates, connectors, and terminal accessories including terminal enlargements and terminal extensions. The 100-E09QJ01 contactor is certified by the CE, CCC, and EAC standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09QJ01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E09QJ01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF