100-E09QJ10

The 100-E09QJ10 contactor is a large IEC 100 and 100-E series contactor from Allen-Bradley. It features a universal coil which offers significant energy conservation, especially in common isolation, bypass, and alternate energy applications. Other features of the electronic coil include low power hold-in current ratings and integrated surge suppression features. The electronic coil on the 100-E09QJ10 contactor is rated for 24 Volts DC. An optional integrated PLC interface can be ordered with the 100-E09QJ10 contactor. Other specifications for the contactor include 9 Amps of rated current, 3 poles, one normally-open contact, and screw-type terminals. The IEC 100 and 100-E series of contactors, which includes the 100-E09QJ10 contactor, is certified by the RCM, EAC, CCC, and CE standards. The rated isolation voltage for 100-E series contactors is 690 Volts AC. The rated impulse withstand voltage is 6 kilovolts.

The insulation class of the coil on the Allen-Bradley 100-E09QJ10 contactor is Class F per the IEC 60947-4-1 standard. The ambient temperature range for storage is -60 to 80 degrees Celsius and the ambient temperature range for operation is -40 to 70 degrees Celsius. The maximum altitude for installation is 3000 meters. The main contacts on the 100-E09QJ10 contactor have an IP2X protection rating. The contactor coil terminals and the auxiliary contacts on the contactor are also rated for IP2X protection ratings in the connected state. The wire size recommended for use with the contacts is 4 square millimeters. The contactor can be used for switching for lighting loads including tungsten lamps and electrical discharge lamps. The contactor can also be used in applications involving shunt-wound motors and series-wound motors. The height of the contactor is 80 millimeters, the width is 45 millimeters, and the depth is 77 millimeters.