100-E116ED11 | Allen Bradley PLC IEC 100 Contactors

100-E116ED11

100-E116ED11

Description:

The 100-E116ED11 contactor is an IEC 100 and 100-E series MCS-E contactor from Allen-Bradley-Rockwell Automation. It has an operational current rating of 116 Amps for the AC-3 motor applications. It includes an electronic coil that operates at a voltage range of 100 to 250 Volts AC at a frequency of 50 to 60 Hertz and 100 to 250 Volts DC.

Rated 4.7 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E116ED11

Add more parts to quote

Description:

The 100-E116ED11 contactor is an IEC 100 and 100-E series MCS-E contactor from Allen-Bradley-Rockwell Automation. It has an operational current rating of 116 Amps for the AC-3 motor applications. It includes an electronic coil that operates at a voltage range of 100 to 250 Volts AC at a frequency of 50 to 60 Hertz and 100 to 250 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E116ED11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 16 reviews

    Technical Specifications for 100-E116ED11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116ED11
DescriptionIEC Large Frame Contactor
Type of Contactor100-E MCS-E contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with PLC Interface
Control Voltage100-250V DC, 100-250V AC at 50/60 Hz
Horsepower75 Hp at 460V AC, 100 Hp at 575V AC at 60 Hz
Rated Operating Power55 kW at 415V AC-3 at 50 Hertz
Number of Poles3 NO
Auxiliary Contact Configuration1 NO, 1 NC
Terminal TypeBus Bar Connection
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116ED11
DescriptionIEC Large Frame Contactor
Type of Contactor100-E MCS-E contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with PLC Interface
Control Voltage100-250V DC, 100-250V AC at 50/60 Hz
Horsepower75 Hp at 460V AC, 100 Hp at 575V AC at 60 Hz
Rated Operating Power55 kW at 415V AC-3 at 50 Hertz
Number of Poles3 NO
Auxiliary Contact Configuration1 NO, 1 NC
Terminal TypeBus Bar Connection
s

About 100-E116ED11

The 100-E116ED11 contactor is an IEC 100 and 100-E series MCS-E type of contactor developed by Allen-Bradley-Rockwell Automation. It has an operational current rating of 116 Amps for AC-3 motor applications. It is a 100-E MCS-E large frame contactor with a standard AC/DC electronic "ED" coil and PLC (Programmable Logic Controller) input. The contactor supports an AC-1 operational current rating of up to 160 Amps at a maximum voltage of 690 Volts AC and an operating temperature of 40 degrees Celsius. It is widely used in industrial applications because of its wide voltage range and sturdy construction. The 100-E116ED11 contactor complies with international standards such as the IEC, UL, and RoHS standards. It is a direct-on-line contactor with 3 main poles that are normally open main contacts. It has 2 auxiliary contacts which are 1 normally open contact and 1 normally closed contact.



The Allen-Bradley 100-E116ED11 IEC 100 series contactor includes bus bar connection terminals. The contactor's electronic coil operates at a voltage range of 100 to 250 Volts AC at an operating frequency of 50 to 60 Hertz and 100 to 250 Volts DC. The universal electronic AC/DC coil of the 100-E116ED11 contactor makes it much easier for users to select the right coil or contact for their application needs that can provide an energy-efficient operating solution. It can switch 3-phase AC motors with a power rating of 55 kilowatts at 415 Volts AC and 50 Hertz. It can support 100-Horsepower motors at 575 Volts AC and a frequency of 60 Hertz. Optional accessories for the 100-E116ED11 contactor include snap-in auxiliary contact blocks, mechanical interlocks, terminal lug kits, terminal shrouds, reversing power wiring kits, mounting plates, and connectors for circuit breaker installation.



Repair Services for 100-E116ED11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E116ED11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E116ED11

Resolutions For 100-E116ED11

About

Technical Specifications for 100-E116ED11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116ED11
DescriptionIEC Large Frame Contactor
Type of Contactor100-E MCS-E contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with PLC Interface
Control Voltage100-250V DC, 100-250V AC at 50/60 Hz
Horsepower75 Hp at 460V AC, 100 Hp at 575V AC at 60 Hz
Rated Operating Power55 kW at 415V AC-3 at 50 Hertz
Number of Poles3 NO
Auxiliary Contact Configuration1 NO, 1 NC
Terminal TypeBus Bar Connection
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116ED11
DescriptionIEC Large Frame Contactor
Type of Contactor100-E MCS-E contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with PLC Interface
Control Voltage100-250V DC, 100-250V AC at 50/60 Hz
Horsepower75 Hp at 460V AC, 100 Hp at 575V AC at 60 Hz
Rated Operating Power55 kW at 415V AC-3 at 50 Hertz
Number of Poles3 NO
Auxiliary Contact Configuration1 NO, 1 NC
Terminal TypeBus Bar Connection

About 100-E116ED11

The 100-E116ED11 contactor is an IEC 100 and 100-E series MCS-E type of contactor developed by Allen-Bradley-Rockwell Automation. It has an operational current rating of 116 Amps for AC-3 motor applications. It is a 100-E MCS-E large frame contactor with a standard AC/DC electronic "ED" coil and PLC (Programmable Logic Controller) input. The contactor supports an AC-1 operational current rating of up to 160 Amps at a maximum voltage of 690 Volts AC and an operating temperature of 40 degrees Celsius. It is widely used in industrial applications because of its wide voltage range and sturdy construction. The 100-E116ED11 contactor complies with international standards such as the IEC, UL, and RoHS standards. It is a direct-on-line contactor with 3 main poles that are normally open main contacts. It has 2 auxiliary contacts which are 1 normally open contact and 1 normally closed contact.



The Allen-Bradley 100-E116ED11 IEC 100 series contactor includes bus bar connection terminals. The contactor's electronic coil operates at a voltage range of 100 to 250 Volts AC at an operating frequency of 50 to 60 Hertz and 100 to 250 Volts DC. The universal electronic AC/DC coil of the 100-E116ED11 contactor makes it much easier for users to select the right coil or contact for their application needs that can provide an energy-efficient operating solution. It can switch 3-phase AC motors with a power rating of 55 kilowatts at 415 Volts AC and 50 Hertz. It can support 100-Horsepower motors at 575 Volts AC and a frequency of 60 Hertz. Optional accessories for the 100-E116ED11 contactor include snap-in auxiliary contact blocks, mechanical interlocks, terminal lug kits, terminal shrouds, reversing power wiring kits, mounting plates, and connectors for circuit breaker installation.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF