100-E116EN11 | Allen Bradley PLC IEC 100 Contactors

100-E116EN11

100-E116EN11

Description:

The 100-E116EN11 contactor is a Bulletin 100-E and IEC 100 series contactor from Allen-Bradley/Rockwell Automation. It includes a standard AC/DC electronic “EN” coil with a control voltage range of 250 to 500 Volts AC and DC. It has an operating current rating of 116 Amps.

Rated 4.9 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E116EN11

Add more parts to quote

Description:

The 100-E116EN11 contactor is a Bulletin 100-E and IEC 100 series contactor from Allen-Bradley/Rockwell Automation. It includes a standard AC/DC electronic “EN” coil with a control voltage range of 250 to 500 Volts AC and DC. It has an operating current rating of 116 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E116EN11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 9 reviews

    Technical Specifications for 100-E116EN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116EN11
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization Category AC-3, AC-1
Coil typeStandard Electronic Coil with PLC Interface
Control Voltage250-500V DC, 250- 500V AC at 50/60 Hz
Operating Power at AC-355 kW at 400/415 V
Horsepower100 Hp at 575 Volts AC
Number of Poles3 NO
Auxiliary Contacts1 NO, 1 NC
Terminal TypeBar Connection
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116EN11
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization Category AC-3, AC-1
Coil typeStandard Electronic Coil with PLC Interface
Control Voltage250-500V DC, 250- 500V AC at 50/60 Hz
Operating Power at AC-355 kW at 400/415 V
Horsepower100 Hp at 575 Volts AC
Number of Poles3 NO
Auxiliary Contacts1 NO, 1 NC
Terminal TypeBar Connection
s

About 100-E116EN11

The 100-E116EN11 contactor is an IEC 100 Contactors series and Bulletin 100-E MSC-E series contactor from Allen-Bradley/Rockwell Automation. It has a 116-Amp AC-3 operating current rating at 400 Volts and an ambient temperature of 60 degrees Celsius. It features a standard AC/DC electronic “EN” coil with a control voltage range of 250 to 500 Volts AC and DC. The operating frequencies for the AC voltage are 50 and 60 Hertz. The 100-E116EN11 contactor includes a PLC interface that offers direct communication with the PLC in certain applications. The PLC interface is powered by a 24 Volts DC power supply with a 10-milliamp current rating. The operating times of the coil include 20 to 31 milliseconds of closing delay time and 24 to 34 milliseconds of opening delay time.



The 100-E116EN11 direct-on line AC and DC-operated contactor come with bus bar connection terminals. The electrical conductor used at the main contacts terminal should have a cross-section of 10 to 95 square millimeters and a tightening torque of 8 N-m. The 100-E116EN11 contactor is a 3-pole contactor with 3 normally open main contacts and 2 auxiliary contacts that include one normally open contact and one normally closed contact. The 100-E116EN11 contactor supports AC-1 and AC-3 applications. The 100-E116EN11 contactor has a maximum switching frequency of 300 operations per hour for AC-1 and AC-3 applications, and 150 operations per hour in AC-4 applications. It has a rated AC-3 operating power of up to 55 kilowatts at 1000 Volts and it can operate at up to 100 Horsepower with AC motors rated at 575 Volts and 60 Hertz. The contactor has a height of 5.91 inches, a width of 3.54 inches, a depth of 5.61 inches with the PLC input, and a depth of 4.96 inches without it.



Repair Services for 100-E116EN11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E116EN11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E116EN11

Resolutions For 100-E116EN11

About

Technical Specifications for 100-E116EN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116EN11
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization Category AC-3, AC-1
Coil typeStandard Electronic Coil with PLC Interface
Control Voltage250-500V DC, 250- 500V AC at 50/60 Hz
Operating Power at AC-355 kW at 400/415 V
Horsepower100 Hp at 575 Volts AC
Number of Poles3 NO
Auxiliary Contacts1 NO, 1 NC
Terminal TypeBar Connection
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116EN11
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization Category AC-3, AC-1
Coil typeStandard Electronic Coil with PLC Interface
Control Voltage250-500V DC, 250- 500V AC at 50/60 Hz
Operating Power at AC-355 kW at 400/415 V
Horsepower100 Hp at 575 Volts AC
Number of Poles3 NO
Auxiliary Contacts1 NO, 1 NC
Terminal TypeBar Connection

About 100-E116EN11

The 100-E116EN11 contactor is an IEC 100 Contactors series and Bulletin 100-E MSC-E series contactor from Allen-Bradley/Rockwell Automation. It has a 116-Amp AC-3 operating current rating at 400 Volts and an ambient temperature of 60 degrees Celsius. It features a standard AC/DC electronic “EN” coil with a control voltage range of 250 to 500 Volts AC and DC. The operating frequencies for the AC voltage are 50 and 60 Hertz. The 100-E116EN11 contactor includes a PLC interface that offers direct communication with the PLC in certain applications. The PLC interface is powered by a 24 Volts DC power supply with a 10-milliamp current rating. The operating times of the coil include 20 to 31 milliseconds of closing delay time and 24 to 34 milliseconds of opening delay time.



The 100-E116EN11 direct-on line AC and DC-operated contactor come with bus bar connection terminals. The electrical conductor used at the main contacts terminal should have a cross-section of 10 to 95 square millimeters and a tightening torque of 8 N-m. The 100-E116EN11 contactor is a 3-pole contactor with 3 normally open main contacts and 2 auxiliary contacts that include one normally open contact and one normally closed contact. The 100-E116EN11 contactor supports AC-1 and AC-3 applications. The 100-E116EN11 contactor has a maximum switching frequency of 300 operations per hour for AC-1 and AC-3 applications, and 150 operations per hour in AC-4 applications. It has a rated AC-3 operating power of up to 55 kilowatts at 1000 Volts and it can operate at up to 100 Horsepower with AC motors rated at 575 Volts and 60 Hertz. The contactor has a height of 5.91 inches, a width of 3.54 inches, a depth of 5.61 inches with the PLC input, and a depth of 4.96 inches without it.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF