100-E116KD11

The 100-E116KD11 contactor is an IEC 100 direct-on line large frame contactor developed by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley 100-E line of IEC 100 Contactors. It includes a standard electronic AC/DC coil with an AC voltage range of 100 to 250 Volts AC at 50/60 Hertz frequency and a DC voltage range of 100 to 250 Volts DC. The electronic coil of the 100-E116KD11 contactor includes an integrated PLC interface and surge suppressor. The standard "KD" coil has low pick-up and holding power ratings of 135 Watts and 3 Watts, respectively. The coil has a closing time delay ranging from 20 to 31 milliseconds and an opening time delay ranging from 24 to 34 milliseconds. In AC-3 applications at 400 Volts, the 100-E116KD11 contactor has a maximum load current of 116 Amps. In AC-1 applications at 690 Volts, the contactor has a rated operational current of 160 Amps. The electronic coil has a rated operational power of 30 Horsepower at 200 Volts, 40 Horsepower at 230 Volts, 75 Horsepower at 460 Volts, and 100 Horsepower at 575 Volts.

The Allen-Bradley/Rockwell Automation 100-E116KD11 contactor has 3 normally open main contacts, one auxiliary contact that is normally open, and one auxiliary contact that is normally closed. The 100-E116KD11 contactor does not have any normally closed main contacts. Auxiliary contact blocks can be side-mounted onto this contactor as needed. Mechanical interlocks can also be used with this contactor variant to interlock 2 contactors in certain applications. A variety of additional accessories such as terminal lugs, terminal shrouds, and power wiring kits can be used in combination with the contactor. The 100-E116KD11 contactor with a standard coil has dimensions of 5.91 inches in height, 3.54 inches in width, and 4.96 inches in depth. The contactor comes with an IP00/IP2X rated protective enclosure.