100-E116KD11L | Allen Bradley PLC IEC 100 Contactors

100-E116KD11L

100-E116KD11L

Description:

The 100-E116KD11L contactor is an IEC 100 contactor manufactured by Allen-Bradley. It has an operating current rating of 116 Amps. It comes with a standard electronic coil with an optional PLC interface and it has 3 normally open main contacts. The auxiliary contacts are 1 NO contact and 1 NC contact.

Rated 4.7 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E116KD11L

Add more parts to quote

Description:

The 100-E116KD11L contactor is an IEC 100 contactor manufactured by Allen-Bradley. It has an operating current rating of 116 Amps. It comes with a standard electronic coil with an optional PLC interface and it has 3 normally open main contacts. The auxiliary contacts are 1 NO contact and 1 NC contact.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E116KD11L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 6 reviews

    Technical Specifications for 100-E116KD11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KD11L
DescriptionIEC Large Frame Contactor
Product LineBulletin 100-E
Rated Operational Current 116 Amps
Utilization CategoryAC-3
Coil TypeStandard Electronic Coil
Control Voltage100-250V AC at 50/60 Hz and 100-250V DC
Horsepower30 Hp at 200V, 75 Hp at 460V and 100 Hp at 575V
Main Contact Configuration3 NO Contacts
Auxiliary Contacts1 NO, 1 NC
Connection TypeCable Clamp with Built-in Terminal Lugs
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KD11L
DescriptionIEC Large Frame Contactor
Product LineBulletin 100-E
Rated Operational Current 116 Amps
Utilization CategoryAC-3
Coil TypeStandard Electronic Coil
Control Voltage100-250V AC at 50/60 Hz and 100-250V DC
Horsepower30 Hp at 200V, 75 Hp at 460V and 100 Hp at 575V
Main Contact Configuration3 NO Contacts
Auxiliary Contacts1 NO, 1 NC
Connection TypeCable Clamp with Built-in Terminal Lugs
s

About 100-E116KD11L

The 100-E116KD11L contactor is a Bulletin 100-E and IEC 100 series contactor manufactured by Allen-Bradley. It is a 3-phase contactor rated at 116 Amps at 400 Volts (AC-3) and 160 Amps at 690 Volts (AC-1). The operating temperature range of the contactor is from -40 to +70 degrees Celsius. The contactor's rated operating currents change depending on the ambient temperature. At 60 degrees Celsius and 690 Volts, the maximum AC-1 load current rating is 145 Amps, while at 70 degrees Celsius, it is 130 Amps. The 100-E116KD11L contactor uses a standard electronic coil which can support an integrated PLC interface in some applications. The contactor has a control voltage range of 100 to 250 Volts AC and DC. The frequency rating of the AC voltage is 50 or 60 Hertz.



The 100-E116KD11L contactor has a cable clamp-type of connection terminal. The cable clamp terminal has built-in terminal lugs, as indicated by the letter "L" at the end of the contactor's model number. The recommended torque for the main contacts terminal is 8 N-m for conductors with cross-sections ranging from 10 to 95 square millimeters. The contactor has 3 normally open main contacts. The auxiliary contacts are available in a configuration with one NO and one NC contact. The 100-E116KD11L contactor supports 37 kilowatts of rated operational power to switch 3-phase motors in a voltage range of 220 to 240 Volts (AC-3) and an ambient temperature of 60 degrees Celsius. Similarly, when switching 3-phase motors at 50 Hertz operating frequency, it has a rated operational power of 75 kilowatts at 440 Volts and 63 kilowatts at 690 Volts.



Repair Services for 100-E116KD11L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KD11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E116KD11L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E116KD11L

Resolutions For 100-E116KD11L

About

Technical Specifications for 100-E116KD11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KD11L
DescriptionIEC Large Frame Contactor
Product LineBulletin 100-E
Rated Operational Current 116 Amps
Utilization CategoryAC-3
Coil TypeStandard Electronic Coil
Control Voltage100-250V AC at 50/60 Hz and 100-250V DC
Horsepower30 Hp at 200V, 75 Hp at 460V and 100 Hp at 575V
Main Contact Configuration3 NO Contacts
Auxiliary Contacts1 NO, 1 NC
Connection TypeCable Clamp with Built-in Terminal Lugs
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KD11L
DescriptionIEC Large Frame Contactor
Product LineBulletin 100-E
Rated Operational Current 116 Amps
Utilization CategoryAC-3
Coil TypeStandard Electronic Coil
Control Voltage100-250V AC at 50/60 Hz and 100-250V DC
Horsepower30 Hp at 200V, 75 Hp at 460V and 100 Hp at 575V
Main Contact Configuration3 NO Contacts
Auxiliary Contacts1 NO, 1 NC
Connection TypeCable Clamp with Built-in Terminal Lugs

About 100-E116KD11L

The 100-E116KD11L contactor is a Bulletin 100-E and IEC 100 series contactor manufactured by Allen-Bradley. It is a 3-phase contactor rated at 116 Amps at 400 Volts (AC-3) and 160 Amps at 690 Volts (AC-1). The operating temperature range of the contactor is from -40 to +70 degrees Celsius. The contactor's rated operating currents change depending on the ambient temperature. At 60 degrees Celsius and 690 Volts, the maximum AC-1 load current rating is 145 Amps, while at 70 degrees Celsius, it is 130 Amps. The 100-E116KD11L contactor uses a standard electronic coil which can support an integrated PLC interface in some applications. The contactor has a control voltage range of 100 to 250 Volts AC and DC. The frequency rating of the AC voltage is 50 or 60 Hertz.



The 100-E116KD11L contactor has a cable clamp-type of connection terminal. The cable clamp terminal has built-in terminal lugs, as indicated by the letter "L" at the end of the contactor's model number. The recommended torque for the main contacts terminal is 8 N-m for conductors with cross-sections ranging from 10 to 95 square millimeters. The contactor has 3 normally open main contacts. The auxiliary contacts are available in a configuration with one NO and one NC contact. The 100-E116KD11L contactor supports 37 kilowatts of rated operational power to switch 3-phase motors in a voltage range of 220 to 240 Volts (AC-3) and an ambient temperature of 60 degrees Celsius. Similarly, when switching 3-phase motors at 50 Hertz operating frequency, it has a rated operational power of 75 kilowatts at 440 Volts and 63 kilowatts at 690 Volts.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KD11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KD11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF