100-E116KN11L | Allen Bradley PLC IEC 100 Contactors

100-E116KN11L

100-E116KN11L

Description:

The 100-E116KN11L contactor is a large-frame IEC 100 contactor manufactured by Allen-Bradley. It has a rated operational current of 116 Amps. It features 3 NO main contacts, 1 NO auxiliary contact, and 1 NC auxiliary contact. This contactor comes with a standard electronic AC/DC coil and an optional PLC interface.

Rated 4.6 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E116KN11L

Add more parts to quote

Description:

The 100-E116KN11L contactor is a large-frame IEC 100 contactor manufactured by Allen-Bradley. It has a rated operational current of 116 Amps. It features 3 NO main contacts, 1 NO auxiliary contact, and 1 NC auxiliary contact. This contactor comes with a standard electronic AC/DC coil and an optional PLC interface.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E116KN11L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 9 reviews

    Technical Specifications for 100-E116KN11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KN11L
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with Optional PLC Interface
Control Voltage250-500V DC, 250-500V AC at 50/60 Hz
Horsepower 40 Hp at 230V, 75 Hp at 460V
Rated Operating Power 55 kW at 415V (AC-3)
Main Contact Configuration3 NO
Auxiliary Contact Type1 NO, 1 NC
Terminal TypeCable Clamp Terminal with Built-in Lugs
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KN11L
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with Optional PLC Interface
Control Voltage250-500V DC, 250-500V AC at 50/60 Hz
Horsepower 40 Hp at 230V, 75 Hp at 460V
Rated Operating Power 55 kW at 415V (AC-3)
Main Contact Configuration3 NO
Auxiliary Contact Type1 NO, 1 NC
Terminal TypeCable Clamp Terminal with Built-in Lugs
s

About 100-E116KN11L

The 100-E116KN11L contactor is a large-frame IEC 100 series contactor that has been designed and manufactured by Allen-Bradley. It is one of the Bulletin 100-E series IEC 100 contactors, which have a smaller footprint and a wider voltage and power range than the older 100-C and 100-D series contactors. It has 116 Amps of rated operating current and it can operate with 55-kilowatt AC-3 motors at voltage ratings of 400/415 Volts and 1000 Volts. The 100-E series contactors’ wide kilowatt power range makes them suitable for use in a variety of demanding industrial applications such as applications in steel factories, where equipment robustness and durability are required.  The 100-E116KN11L contactor has a maximum switching frequency of 300 operations per hour for AC-1 and AC-3 motor applications.



The 100-E116KN11L contactor features 3 normally open main contacts, one normally open auxiliary contact, and one normally closed auxiliary contact. It includes a standard electronic AC/DC coil as well as support for an optional PLC interface. The control voltage range for the “KN” electronic coil on the 100-E116KN11L contactor is 250 to 500 Volts AC and DC. The AC voltage has a frequency rating of 50/60 Hertz. The coil has a pick-up power rating of 205 Watts and a hold-in power rating of 4 Watts. This contactor model also comes with a cable clamp connection with built-in terminal lugs which need to be ordered separately for other contactor models. The conductors used in the main contact terminals must have a maximum cross-section area of 95 square millimeters, and the circuit length should not exceed 22 millimeters. The dimensions of the 100-E116KN11L contactor with the PLC input are approximately 150 millimeters in height, 90 millimeters in width, and 142.5 millimeters in depth.



Repair Services for 100-E116KN11L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KN11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E116KN11L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E116KN11L

Resolutions For 100-E116KN11L

About

Technical Specifications for 100-E116KN11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KN11L
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with Optional PLC Interface
Control Voltage250-500V DC, 250-500V AC at 50/60 Hz
Horsepower 40 Hp at 230V, 75 Hp at 460V
Rated Operating Power 55 kW at 415V (AC-3)
Main Contact Configuration3 NO
Auxiliary Contact Type1 NO, 1 NC
Terminal TypeCable Clamp Terminal with Built-in Lugs
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KN11L
DescriptionIEC Large Frame Contactor
Rated Operational Current 116 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Standard Electronic Coil with Optional PLC Interface
Control Voltage250-500V DC, 250-500V AC at 50/60 Hz
Horsepower 40 Hp at 230V, 75 Hp at 460V
Rated Operating Power 55 kW at 415V (AC-3)
Main Contact Configuration3 NO
Auxiliary Contact Type1 NO, 1 NC
Terminal TypeCable Clamp Terminal with Built-in Lugs

About 100-E116KN11L

The 100-E116KN11L contactor is a large-frame IEC 100 series contactor that has been designed and manufactured by Allen-Bradley. It is one of the Bulletin 100-E series IEC 100 contactors, which have a smaller footprint and a wider voltage and power range than the older 100-C and 100-D series contactors. It has 116 Amps of rated operating current and it can operate with 55-kilowatt AC-3 motors at voltage ratings of 400/415 Volts and 1000 Volts. The 100-E series contactors’ wide kilowatt power range makes them suitable for use in a variety of demanding industrial applications such as applications in steel factories, where equipment robustness and durability are required.  The 100-E116KN11L contactor has a maximum switching frequency of 300 operations per hour for AC-1 and AC-3 motor applications.



The 100-E116KN11L contactor features 3 normally open main contacts, one normally open auxiliary contact, and one normally closed auxiliary contact. It includes a standard electronic AC/DC coil as well as support for an optional PLC interface. The control voltage range for the “KN” electronic coil on the 100-E116KN11L contactor is 250 to 500 Volts AC and DC. The AC voltage has a frequency rating of 50/60 Hertz. The coil has a pick-up power rating of 205 Watts and a hold-in power rating of 4 Watts. This contactor model also comes with a cable clamp connection with built-in terminal lugs which need to be ordered separately for other contactor models. The conductors used in the main contact terminals must have a maximum cross-section area of 95 square millimeters, and the circuit length should not exceed 22 millimeters. The dimensions of the 100-E116KN11L contactor with the PLC input are approximately 150 millimeters in height, 90 millimeters in width, and 142.5 millimeters in depth.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KN11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KN11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF