100-E116KY11L | Allen Bradley PLC IEC 100 Contactors

100-E116KY11L

100-E116KY11L

Description:

The Allen-Bradley 100-E116KY11L contactor is an IEC 100 series 116 Amps-rated contactor. It has built-in lugs for the main contactor terminals. The 100-E116KY11L contactor is a 3-pole contactor.

Rated 4.8 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E116KY11L

Add more parts to quote

Description:

The Allen-Bradley 100-E116KY11L contactor is an IEC 100 series 116 Amps-rated contactor. It has built-in lugs for the main contactor terminals. The 100-E116KY11L contactor is a 3-pole contactor.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E116KY11L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 13 reviews

    Technical Specifications for 100-E116KY11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KY11L
Product TypeContactor
Coil TypeElectronic
Control Voltage48 to 130 Volts AC/DC
Current Rating116 Amps
Poles3
MountingPanel or DIN Rail
TerminalsBuilt-in Lugs
NC Auxiliary Contact1
NO Auxiliary Contact1
Maximum Elevation3000 meters
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KY11L
Product TypeContactor
Coil TypeElectronic
Control Voltage48 to 130 Volts AC/DC
Current Rating116 Amps
Poles3
MountingPanel or DIN Rail
TerminalsBuilt-in Lugs
NC Auxiliary Contact1
NO Auxiliary Contact1
Maximum Elevation3000 meters
s

About 100-E116KY11L

The Allen-Bradley 100-E116KY11L contactor is a large 116 Amps-rated IEC 100 series contactor. It has built-in lugs for the main contactor terminals. The number of poles on the 100-E116KY11L contactor is 3. The coil type is electronic and the coil control voltage range is 48 to 130 Volts AC/DC. The auxiliary contact configuration of the 100-E116KY11L contactor includes 1 normally open contact and 1 normally closed contact. The 100-E116KY11L contactor belongs to the Allen-Bradley 100-E product line which supports 4 to 560 kilowatts output ratings at 400 Volts and 5 to 900 Horsepower ratings at 460 Volts. The single-phase current ratings for the 100-E contactors go up to 2650 Amps. Electronic coils on the 100-E contactors support AC/DC voltages, have a wide voltage range, low power pick-up and hold-in ratings, and an optional PLC interface.



A complete range of accessories is available for the 100-E contactors like the Allen-Bradley 100-E116KY11L contactor that include side mount/front mount auxiliary contacts, connecting bars, terminal lugs, and terminal shields. The height of the 100-E116KY11L contactor is 150 millimeters, its width is 90 millimeters, and its depth is 126 millimeters. The auxiliary contacts and coil terminals are IP2X rated. The main contacts are IP00 rated. Allen-Bradley recommends that for optimal performance, the installation altitude should be less than or equal to 3000 meters and the ambient operating temperature should be between -40 and 70 degrees Celsius. The impulse withstand voltage for the contactor is 8 kilovolts. The isolation voltage rating for the 100-E116KY11L contactor is 1000 Volts per the IEC standard. The contactor is certified by the CE, CSA, and KC standards.



Repair Services for 100-E116KY11L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KY11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E116KY11L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E116KY11L

Resolutions For 100-E116KY11L

About

Technical Specifications for 100-E116KY11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KY11L
Product TypeContactor
Coil TypeElectronic
Control Voltage48 to 130 Volts AC/DC
Current Rating116 Amps
Poles3
MountingPanel or DIN Rail
TerminalsBuilt-in Lugs
NC Auxiliary Contact1
NO Auxiliary Contact1
Maximum Elevation3000 meters
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E116KY11L
Product TypeContactor
Coil TypeElectronic
Control Voltage48 to 130 Volts AC/DC
Current Rating116 Amps
Poles3
MountingPanel or DIN Rail
TerminalsBuilt-in Lugs
NC Auxiliary Contact1
NO Auxiliary Contact1
Maximum Elevation3000 meters

About 100-E116KY11L

The Allen-Bradley 100-E116KY11L contactor is a large 116 Amps-rated IEC 100 series contactor. It has built-in lugs for the main contactor terminals. The number of poles on the 100-E116KY11L contactor is 3. The coil type is electronic and the coil control voltage range is 48 to 130 Volts AC/DC. The auxiliary contact configuration of the 100-E116KY11L contactor includes 1 normally open contact and 1 normally closed contact. The 100-E116KY11L contactor belongs to the Allen-Bradley 100-E product line which supports 4 to 560 kilowatts output ratings at 400 Volts and 5 to 900 Horsepower ratings at 460 Volts. The single-phase current ratings for the 100-E contactors go up to 2650 Amps. Electronic coils on the 100-E contactors support AC/DC voltages, have a wide voltage range, low power pick-up and hold-in ratings, and an optional PLC interface.



A complete range of accessories is available for the 100-E contactors like the Allen-Bradley 100-E116KY11L contactor that include side mount/front mount auxiliary contacts, connecting bars, terminal lugs, and terminal shields. The height of the 100-E116KY11L contactor is 150 millimeters, its width is 90 millimeters, and its depth is 126 millimeters. The auxiliary contacts and coil terminals are IP2X rated. The main contacts are IP00 rated. Allen-Bradley recommends that for optimal performance, the installation altitude should be less than or equal to 3000 meters and the ambient operating temperature should be between -40 and 70 degrees Celsius. The impulse withstand voltage for the contactor is 8 kilovolts. The isolation voltage rating for the 100-E116KY11L contactor is 1000 Volts per the IEC standard. The contactor is certified by the CE, CSA, and KC standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KY11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E116KY11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF