100-E1260ED11 | Allen Bradley PLC IEC 100 Contactors

100-E1260ED11

100-E1260ED11

Description:

The Allen-Bradley 100-E1260ED11 contactor is a 3-pole direct-on-line contactor. It is part of the Allen-Bradley IEC 100 Contactors series. The 100-E1260ED11 contactor has an operating current rating of 1260 Amps at 690 Volts.

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E1260ED11

Add more parts to quote

Description:

The Allen-Bradley 100-E1260ED11 contactor is a 3-pole direct-on-line contactor. It is part of the Allen-Bradley IEC 100 Contactors series. The 100-E1260ED11 contactor has an operating current rating of 1260 Amps at 690 Volts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E1260ED11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 100-E1260ED11

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E1260ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NC, 1 NO
Maximum Operating Current1260 Amps
AC Coil Voltage100 to 250 Volts AC (at 50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E1260ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NC, 1 NO
Maximum Operating Current1260 Amps
AC Coil Voltage100 to 250 Volts AC (at 50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
s

About 100-E1260ED11

The Allen-Bradley/Rockwell Automation 100-E1260ED11 contactor is a direct-on-line contactor that has 3 poles or 3 main contactors. It has been designed as part of the Bulletin 100-E product line within the IEC 100 Contactors series. The 100-E1260ED11 direct-on-line contactor has low power pick-up and low power hold-in functions and it is designed to be as efficient and environmentally friendly as possible. A complete range of accessories is available for the 100-E1260ED11 direct-on-line contactor from the Allen-Bradley IEC 100 Contactors series to customize it and equip it to meet the requirements of a wide variety of applications. When it is operating at an ambient temperature of 60 degrees Celsius with AC-1 motors that are rated at 690 Volts, the 100-E1260ED11 direct-on-line contactor has a maximum operating current rating of 1260 Amps.



 



The Allen-Bradley/Rockwell Automation 100-E1260ED11 IEC 100 series direct-on-line 3-pole contactor has 2 auxiliary contacts built into it in addition to its 3 main contacts. One of the auxiliary contacts is normally open and the other auxiliary contact is normally closed. Its electronic coil is an AC and DC-powered standard electronic coil that can be ordered to support an optional PLC interface for special applications. The AC coil voltage rating is 100 to 250 Volts AC at 50 to 60 Hertz and the DC coil voltage rating is 100 to 250 Volts DC. The 100-E1260ED11 direct-on-line contactor can be connected to another contactor with a mechanical interlock device, but it needs a separately sold mounting plate. Terminal shrouds can also be added to the 100-E1260ED11 direct-on-line contactor to protect its terminals.



Repair Services for 100-E1260ED11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E1260ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E1260ED11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E1260ED11

Resolutions For 100-E1260ED11

About

Technical Specifications for 100-E1260ED11

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E1260ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NC, 1 NO
Maximum Operating Current1260 Amps
AC Coil Voltage100 to 250 Volts AC (at 50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E1260ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NC, 1 NO
Maximum Operating Current1260 Amps
AC Coil Voltage100 to 250 Volts AC (at 50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC

About 100-E1260ED11

The Allen-Bradley/Rockwell Automation 100-E1260ED11 contactor is a direct-on-line contactor that has 3 poles or 3 main contactors. It has been designed as part of the Bulletin 100-E product line within the IEC 100 Contactors series. The 100-E1260ED11 direct-on-line contactor has low power pick-up and low power hold-in functions and it is designed to be as efficient and environmentally friendly as possible. A complete range of accessories is available for the 100-E1260ED11 direct-on-line contactor from the Allen-Bradley IEC 100 Contactors series to customize it and equip it to meet the requirements of a wide variety of applications. When it is operating at an ambient temperature of 60 degrees Celsius with AC-1 motors that are rated at 690 Volts, the 100-E1260ED11 direct-on-line contactor has a maximum operating current rating of 1260 Amps.



 



The Allen-Bradley/Rockwell Automation 100-E1260ED11 IEC 100 series direct-on-line 3-pole contactor has 2 auxiliary contacts built into it in addition to its 3 main contacts. One of the auxiliary contacts is normally open and the other auxiliary contact is normally closed. Its electronic coil is an AC and DC-powered standard electronic coil that can be ordered to support an optional PLC interface for special applications. The AC coil voltage rating is 100 to 250 Volts AC at 50 to 60 Hertz and the DC coil voltage rating is 100 to 250 Volts DC. The 100-E1260ED11 direct-on-line contactor can be connected to another contactor with a mechanical interlock device, but it needs a separately sold mounting plate. Terminal shrouds can also be added to the 100-E1260ED11 direct-on-line contactor to protect its terminals.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E1260ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E1260ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF