100-E12KY01

The 100-E12KY01 contactor is a motor control contactor from the Allen-Bradley Bulletin 100-E product line in the IEC 100 Contactors series. This product is compliant with the International Electrotechnical Commission (IEC) standards. This contactor model has a smaller footprint than the previous 100-D contactor models, with an approximate height of 80 millimeters and a width of 45 millimeters. The Bulletin 100-E contactors, like the 100-E12KY01 contactor, are next-generation contactors from Allen-Bradley that come with current ratings from 9 Amps to 2650 Amps. This contactor model has a 12 Amps current rating and it falls under the AC3 category. The 100-E12KY01 contactor has 3 poles with 3 Normally Open (N.O.) contacts and 1 Normally Closed (N.C.) auxiliary contact configuration.

The Allen-Bradley 100-E12KY01 IEC 100 contactor is a direct-on-line (DOL) contactor with standard electronic coils and a control voltage range of 48 to 130 Volts AC/DC and an AC frequency of 50/60 Hertz. The rated operational current of the contactor for an AC-3 type of load is 12 Amps at 400 Volts and 60 degrees Celsius. Additionally, the operating current for an AC-1 type of load is 28 Amps at 690 Volts and 40 degrees Celsius. The 100-E12KY01 contactor has a minimum supply voltage range of 220 to 240 Volts at 50 Hertz for a 3-kilowatt AC motor and a maximum supply voltage of 690 Volts at 50 Hertz for a 7.5-kilowatt motor. The product is CCC, EAC, CE, SUVA, and KC certified, and it complies with the IEC/EN60947, UL60947, and CSA standards. As per the IEC 600068-2 standards, the contactor is classified as shock and vibration resistant. The main contacts of the 100-E12KY01 contactor have an IP2X protection rating in the connected state.