100-E146KN11 | Allen Bradley PLC IEC 100 Contactors

100-E146KN11

100-E146KN11

Description:

The Allen-Bradley 100-E146KN11 Contactor is a 3-pole, DIN Rail/panel-mounted electronic contactor from the Bulletin 100E line in the IEC 100 Contactors series. The 100-E146KN11 Contactor has a rated switching current of 146 Ampss. Its operating voltage ranges from 115 to 575 Volts AC or 24 to 440 Volts DC.

Rated 4.5 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E146KN11

Add more parts to quote

Description:

The Allen-Bradley 100-E146KN11 Contactor is a 3-pole, DIN Rail/panel-mounted electronic contactor from the Bulletin 100E line in the IEC 100 Contactors series. The 100-E146KN11 Contactor has a rated switching current of 146 Ampss. Its operating voltage ranges from 115 to 575 Volts AC or 24 to 440 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E146KN11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 13 reviews

    Technical Specifications for 100-E146KN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E146KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating146 Amps
Coil TypeStandard DC Type Electronic Coil
Coil Voltage250 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeScrew Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E146KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating146 Amps
Coil TypeStandard DC Type Electronic Coil
Coil Voltage250 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeScrew Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
s

About 100-E146KN11

The 100-E146KN11 IEC Contactor from Allen-Bradley is a 3-pole AC/DC contactor that is designed for large-frame industrial applications. The 100-E146KN11 Contactor features screw-type wiring terminals for connections to the main current circuit. These contact terminals provide a fast and simplified wiring process for making connections to the main power source. The 100-E146KN11 Contactor has 1 Normally Open (NO) and 1 Normally Closed (NC) contact as built-in auxiliary contacts. Additional auxiliary contacts (up to 4 additional contacts) can be ordered separately to meet application demands. The 100-E146KN11 Contactor has 3 main contacts (3 poles) that are all Normally Open (NO). It supports a direct-on-line connection, which connects 3-phase AC motors directly to a 3-phase power supply. The 100-E146KN11 Contactor has a universal AC/DC coil that helps to streamline device selection. 



The 100-E146KN11 Contactor offers a wider coil range and a lower coil consumption power rating than many other contactors do. The electronic AC/DC coil has an actuating voltage range of 250 to 500 Volts AC (with 50 to 60 Hertz frequency) or 250 to 500 Volts DC. The AC/DC coil comes with IEC rated “Class F” insulation for providing thermal stability even at full loads. The 100-E146KN11 Contactor has a rated operating current of 146 Amps with AC-3 motors at 400 Volts AC and 50 Hertz input and 225 Amps with AC-1 motors at 690 Volt AC (60 Hertz) input. The 100-E146KN11 Contactor supports a direct connection to either an AC or DC power supply. It has a rated operating voltage range of 115 to 575 Volts AC or 24 to 440 Volts DC. The 100-E146KN11 Contactor has an isolation voltage rating of 690 Volts and a maximum impulse withstand rating of 8000 Volts. The 100-E146KN11 Contactor has an IP2X protection class and it has a wider operating temperature range.



Repair Services for 100-E146KN11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E146KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E146KN11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E146KN11

Resolutions For 100-E146KN11

About

Technical Specifications for 100-E146KN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E146KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating146 Amps
Coil TypeStandard DC Type Electronic Coil
Coil Voltage250 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeScrew Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E146KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating146 Amps
Coil TypeStandard DC Type Electronic Coil
Coil Voltage250 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeScrew Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X

About 100-E146KN11

The 100-E146KN11 IEC Contactor from Allen-Bradley is a 3-pole AC/DC contactor that is designed for large-frame industrial applications. The 100-E146KN11 Contactor features screw-type wiring terminals for connections to the main current circuit. These contact terminals provide a fast and simplified wiring process for making connections to the main power source. The 100-E146KN11 Contactor has 1 Normally Open (NO) and 1 Normally Closed (NC) contact as built-in auxiliary contacts. Additional auxiliary contacts (up to 4 additional contacts) can be ordered separately to meet application demands. The 100-E146KN11 Contactor has 3 main contacts (3 poles) that are all Normally Open (NO). It supports a direct-on-line connection, which connects 3-phase AC motors directly to a 3-phase power supply. The 100-E146KN11 Contactor has a universal AC/DC coil that helps to streamline device selection. 



The 100-E146KN11 Contactor offers a wider coil range and a lower coil consumption power rating than many other contactors do. The electronic AC/DC coil has an actuating voltage range of 250 to 500 Volts AC (with 50 to 60 Hertz frequency) or 250 to 500 Volts DC. The AC/DC coil comes with IEC rated “Class F” insulation for providing thermal stability even at full loads. The 100-E146KN11 Contactor has a rated operating current of 146 Amps with AC-3 motors at 400 Volts AC and 50 Hertz input and 225 Amps with AC-1 motors at 690 Volt AC (60 Hertz) input. The 100-E146KN11 Contactor supports a direct connection to either an AC or DC power supply. It has a rated operating voltage range of 115 to 575 Volts AC or 24 to 440 Volts DC. The 100-E146KN11 Contactor has an isolation voltage rating of 690 Volts and a maximum impulse withstand rating of 8000 Volts. The 100-E146KN11 Contactor has an IP2X protection class and it has a wider operating temperature range.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E146KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E146KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF