100-E16EJ10 | Allen Bradley PLC IEC 100 Contactors

100-E16EJ10

100-E16EJ10

Description:

The Allen-Bradley 100-E16EJ10 contractor is an 18 Amps rated IEC 100 contractor. It is a 3-pole contactor. The control voltage for the contactor coil is 24 to 60 Volts AC/DC.

Rated 4.6 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E16EJ10

Add more parts to quote

Description:

The Allen-Bradley 100-E16EJ10 contractor is an 18 Amps rated IEC 100 contractor. It is a 3-pole contactor. The control voltage for the contactor coil is 24 to 60 Volts AC/DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E16EJ10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 12 reviews

    Technical Specifications for 100-E16EJ10

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ10
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage24 to 60 Volts AC/DC
Dimensions80 x 45 x 77 millimeters
Poles3
TerminalsScrew type
NO Auxiliary Contacts1
NC Auxiliary Contacts0
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ10
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage24 to 60 Volts AC/DC
Dimensions80 x 45 x 77 millimeters
Poles3
TerminalsScrew type
NO Auxiliary Contacts1
NC Auxiliary Contacts0
s

About 100-E16EJ10

The Allen-Bradley 100-E16EJ10 contractor is a large contactor from the IEC 100 Contactors series and the 100-E product range. Contactors from the 100-E product line can support 4 to 560 kilowatts of output at 400 Volts AC and 5 to 900 Horsepower of output at 460 Volts AC. The 100-E contactors can also support up to 2650 Amps of current at single-phase AC voltage. They are environmentally friendly and they are supported by a complete range of optional accessories. Electronic coils on the IEC 100 and 100-E series contactors support a wide voltage range and they can host an optional PLC interface. For the 3-phase AC voltage, the 100-E16EJ10 contactor’s current rating is 18 Amps. The 100-E16EJ10 contractor features an electronic coil with low power consumption ratings which is rated for 24 to 60 Volts AC (50 /60 Hertz) and 24 to 60 Volts DC voltage.



The Allen-Bradley 100-E16EJ10 IEC 100 contractor is a 3-pole contactor with screw terminals and one normally-open auxiliary contact. At 40 degrees Celsius, the rated operational current for the contactor at 690 Volts AC (single-phase voltage) is 30 Amps. The 100-E16EJ10 contactor output power ratings at 50 Hertz for AC motors at 2-phase and 3-phase AC are as follows: 4 kilowatts at 220 to 240 Volts AC, 7.5 kilowatts at 380 to 400 Volts AC, and 9 kilowatts at 415 Volts AC, 440 Volts AC, 500 Volts AC, and 690 Volts AC. The 100-E16EJ10 contactor output power ratings at 60 Hertz for AC motors at 2-phase and 3-phase AC are as follows: 5 Horsepower at 220 Volts AC and 230 Volts AC, 10 Horsepower at 460 Volts AC, and 15 Horsepower at 575 Volts AC.



Repair Services for 100-E16EJ10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E16EJ10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E16EJ10

Resolutions For 100-E16EJ10

About

Technical Specifications for 100-E16EJ10

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ10
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage24 to 60 Volts AC/DC
Dimensions80 x 45 x 77 millimeters
Poles3
TerminalsScrew type
NO Auxiliary Contacts1
NC Auxiliary Contacts0
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ10
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage24 to 60 Volts AC/DC
Dimensions80 x 45 x 77 millimeters
Poles3
TerminalsScrew type
NO Auxiliary Contacts1
NC Auxiliary Contacts0

About 100-E16EJ10

The Allen-Bradley 100-E16EJ10 contractor is a large contactor from the IEC 100 Contactors series and the 100-E product range. Contactors from the 100-E product line can support 4 to 560 kilowatts of output at 400 Volts AC and 5 to 900 Horsepower of output at 460 Volts AC. The 100-E contactors can also support up to 2650 Amps of current at single-phase AC voltage. They are environmentally friendly and they are supported by a complete range of optional accessories. Electronic coils on the IEC 100 and 100-E series contactors support a wide voltage range and they can host an optional PLC interface. For the 3-phase AC voltage, the 100-E16EJ10 contactor’s current rating is 18 Amps. The 100-E16EJ10 contractor features an electronic coil with low power consumption ratings which is rated for 24 to 60 Volts AC (50 /60 Hertz) and 24 to 60 Volts DC voltage.



The Allen-Bradley 100-E16EJ10 IEC 100 contractor is a 3-pole contactor with screw terminals and one normally-open auxiliary contact. At 40 degrees Celsius, the rated operational current for the contactor at 690 Volts AC (single-phase voltage) is 30 Amps. The 100-E16EJ10 contactor output power ratings at 50 Hertz for AC motors at 2-phase and 3-phase AC are as follows: 4 kilowatts at 220 to 240 Volts AC, 7.5 kilowatts at 380 to 400 Volts AC, and 9 kilowatts at 415 Volts AC, 440 Volts AC, 500 Volts AC, and 690 Volts AC. The 100-E16EJ10 contactor output power ratings at 60 Hertz for AC motors at 2-phase and 3-phase AC are as follows: 5 Horsepower at 220 Volts AC and 230 Volts AC, 10 Horsepower at 460 Volts AC, and 15 Horsepower at 575 Volts AC.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF