100-E16EJ200 | Allen Bradley PLC IEC 100 Contactors

100-E16EJ200

100-E16EJ200

Description:

The 100-E16EJ200 contactor is an 18 Amps rated contactor. It is part of the IEC 100 and 100-E series from Allen-Bradley. The 100-E16EJ200 contactor is a 4-pole contactor.

Rated 4.7 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E16EJ200

Add more parts to quote

Description:

The 100-E16EJ200 contactor is an 18 Amps rated contactor. It is part of the IEC 100 and 100-E series from Allen-Bradley. The 100-E16EJ200 contactor is a 4-pole contactor.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E16EJ200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 17 reviews

    Technical Specifications for 100-E16EJ200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ200
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage20 to 60 Volts AC/DC
TerminalsScrew Type
Dimensions80 x 45 x 77 milimeters
Poles4
Operating Temperature-40 to 158 degrees Fahrenheit
Storage Temperature-76 to 176 degrees Fahrenheit
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ200
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage20 to 60 Volts AC/DC
TerminalsScrew Type
Dimensions80 x 45 x 77 milimeters
Poles4
Operating Temperature-40 to 158 degrees Fahrenheit
Storage Temperature-76 to 176 degrees Fahrenheit
s

About 100-E16EJ200

The 100-E16EJ200 contactor is an Allen-Bradley industrial contactor from the IEC 100 Contactors series. A contactor is similar to a relay in that both are used for switching circuits on or off. A contactor like the 100-E16EJ200 contactor joins 2 poles without a common circuit between them. A relay on the other hand has a common contact that connects to a neutral position. Another difference between the 2 types of devices is that contactors have high voltage ratings (up to 1000 Volts) while relays have lower voltage ratings. For 3-phase AC voltage, the operational current rating for the 100-E16EJ200 contactor is 18 Amps. The control voltage for the electronic coil on the contactor is 20 to 60 Volts AC/DC. Depending on the application requirements, coils with different AC or DC control voltage ratings can be ordered from Allen-Bradley.



The Allen-Bradley 100-E16EJ200 IEC 100 contactor is a 4-pole contactor that has screw terminals. The contactor also has 2 normally-open contacts and 2 normally-closed contacts. For storage, Allen-Bradley recommends a -76 to 176 degrees Fahrenheit ambient temperature range. For contactor operation, Allen-Bradley recommends a -40 to 158 degrees Fahrenheit ambient temperature range. The contactor should not be operated at altitudes that exceed 3000 meters above sea level. The main contacts on the contactor, the coil terminals, and the auxiliary contacts are all IP2X rated. The 100-E16EJ200 contactor complies with shock ratings per the IEC 60068-2-27 standards and vibration ratings per the IEC 60068-2-6 standards. The insulation class of the electronic coil on the 100-E16EJ200 contactor is Class F. The rated impulse withstand voltage is 6 kilovolts. Contactor installation should only be performed by trained technicians.



Repair Services for 100-E16EJ200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E16EJ200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E16EJ200

Resolutions For 100-E16EJ200

About

Technical Specifications for 100-E16EJ200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ200
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage20 to 60 Volts AC/DC
TerminalsScrew Type
Dimensions80 x 45 x 77 milimeters
Poles4
Operating Temperature-40 to 158 degrees Fahrenheit
Storage Temperature-76 to 176 degrees Fahrenheit
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16EJ200
Product TypeContactor
Coil TypeElectronic
MountingPanel/DIN Rail
Rated Current18 Amps
Control Voltage20 to 60 Volts AC/DC
TerminalsScrew Type
Dimensions80 x 45 x 77 milimeters
Poles4
Operating Temperature-40 to 158 degrees Fahrenheit
Storage Temperature-76 to 176 degrees Fahrenheit

About 100-E16EJ200

The 100-E16EJ200 contactor is an Allen-Bradley industrial contactor from the IEC 100 Contactors series. A contactor is similar to a relay in that both are used for switching circuits on or off. A contactor like the 100-E16EJ200 contactor joins 2 poles without a common circuit between them. A relay on the other hand has a common contact that connects to a neutral position. Another difference between the 2 types of devices is that contactors have high voltage ratings (up to 1000 Volts) while relays have lower voltage ratings. For 3-phase AC voltage, the operational current rating for the 100-E16EJ200 contactor is 18 Amps. The control voltage for the electronic coil on the contactor is 20 to 60 Volts AC/DC. Depending on the application requirements, coils with different AC or DC control voltage ratings can be ordered from Allen-Bradley.



The Allen-Bradley 100-E16EJ200 IEC 100 contactor is a 4-pole contactor that has screw terminals. The contactor also has 2 normally-open contacts and 2 normally-closed contacts. For storage, Allen-Bradley recommends a -76 to 176 degrees Fahrenheit ambient temperature range. For contactor operation, Allen-Bradley recommends a -40 to 158 degrees Fahrenheit ambient temperature range. The contactor should not be operated at altitudes that exceed 3000 meters above sea level. The main contacts on the contactor, the coil terminals, and the auxiliary contacts are all IP2X rated. The 100-E16EJ200 contactor complies with shock ratings per the IEC 60068-2-27 standards and vibration ratings per the IEC 60068-2-6 standards. The insulation class of the electronic coil on the 100-E16EJ200 contactor is Class F. The rated impulse withstand voltage is 6 kilovolts. Contactor installation should only be performed by trained technicians.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF