100-E16EJ400

The IEC 100 and 100-E series 100-E16EJ400 contactor is an 18 Amps-rated Allen-Bradley contactor. The IEC 100 and 100-E series contactors have compact dimensions and they can support up to 900 Horsepower of output at 460 Volts and 560 kilowatts at 400 Volts. The 100-E16EJ400 contactor is a 4-pole contactor with screw type terminals. The contactor coil is electronic and is rated for 24 to 60 Volts AC/DC control voltage. The rated coil frequency is 50/60 Hertz for AC and DC voltage. The coil for this contactor supports low power consumption. There are 4 normally open contacts on the 100-E16EJ400 contactor. The auxiliary contacts, the coil terminals, and the main contacts on the 100-E16EJ400 contactor are all IP2X rated. The coil insulation class is Class F per the IEC 60947-4-1 standards. The 100-E16EJ400 contactor belongs to the climatic withstand Category B climatic withstand category per the IEC 60947-1, Annex 0 standards.

At 40 degrees Celsius, the rated current for the Allen-Bradley 100-E16EJ400 contactor is 30 Amps at 690 Volts AC (single-phase). The ambient specifications for the contactor include a maximum supported operating altitude of 3000 meters, a -40 to +70 degrees Celsius operating temperature range, and a -60 to +80 degrees Celsius storage temperature range. The rated isolation voltage for the 100-E16EJ400 contactor per the IEC standard is 690 Volts. The rated isolation voltage for the 100-E16EJ400 contactor per the UL/CSA standard is 600 Volts. A complete range of accessories is available for the IEC 100 and 100-E contactors like this one, including auxiliary contact blocks, mechanical interlocks, DC interface modules, electronic timers, mechanical latches, terminal blocks, protective covers, terminal shields and shrouds, terminal lugs, mounting plates, and power wiring kits. Only qualified personnel should install, operate, and maintain contactors like the 100-E16EJ400 contactor and related machinery.