100-E16KD400 | Allen Bradley PLC IEC 100 Contactors

100-E16KD400

100-E16KD400

Description:

The Allen-Bradley 100-E16KD400 AC/DC Contactor is a 4-pole, DIN Rail/panel mounted electronic contactor. It is part of the IEC 100 Contactors series. The 100-E16KD400 Contactor has a rated switching current of 16 Amps and an operating voltage range from 115 to 575 Volt AC.

Rated 5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E16KD400

Add more parts to quote

Description:

The Allen-Bradley 100-E16KD400 AC/DC Contactor is a 4-pole, DIN Rail/panel mounted electronic contactor. It is part of the IEC 100 Contactors series. The 100-E16KD400 Contactor has a rated switching current of 16 Amps and an operating voltage range from 115 to 575 Volt AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E16KD400.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 16 reviews

    Technical Specifications for 100-E16KD400

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KD400
Product TypeAC/DC-Operated Contactor
Operating Voltage115 to 690 Volts AC, 24 to 440 Volts DC
Current Rating30 Amps
Coil TypeStandard AC/DC Type Electronic Coils
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Main Contacts4 Normally Open (NO) Contacts
Protection ClassIP2X
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KD400
Product TypeAC/DC-Operated Contactor
Operating Voltage115 to 690 Volts AC, 24 to 440 Volts DC
Current Rating30 Amps
Coil TypeStandard AC/DC Type Electronic Coils
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Main Contacts4 Normally Open (NO) Contacts
Protection ClassIP2X
s

About 100-E16KD400

The 100-E16KD400 IEC Large Frame Contactor is a 4-pole AC/DC contactor from the Allen-Bradley/Rockwell Automation Bulletin 100-E product line of high-performance industrial contactors from the IEC 100 Contactors series. These contactors are designed for direct-on-line connections to a power source, and they have a wider voltage range to suit a wider range of applications than most other contactors can handle. The 100-E16KD400 Contactor has a very compact design that features significantly reduced weight and dimensions to save as much panel space as possible. The 100-E16KD400 Contactor comes with standard AC/DC electronic coils and without a PLC interface. These standard universal AC/DC coils have an operating voltage range between 100 and 250 Volts AC (at 50/60 Hertz) and between 100 and 250 Volts DC. The coil comes with screw-type wiring terminals and Class F insulation for protection. 



 



The Allen-Bradley/Rockwell Automation 100-E16KD400 Contactor’s main circuit has an acceptable operating voltage range between 115 and 690 Volts AC (with 50/60 Hertz line frequency) and 24 and 440 Volts DC. The main circuit also has a carrying current capacity of 30 Amps at 600 and 690 Volts AC and a maximum switching rating of 9 kilowatts at 690 Volts AC. The 100-E16KD400 Contactor has an isolation voltage rating of up to 690 Volts AC and a maximum impulse withstand rating of up to 6000 Volts. The 100-E16KD400 Contactor has 4 Normally Open (NO) main pole contacts with screw-type terminals for quick and simplified field wiring. The 100-E16KD400 Contactor has a rated operating temperature range of -40 to 70 degrees Celsius, and it is designed for operating at altitudes of up to 3000 meters. The 100-E16KD400 Contactor has an IP2X industrial enclosure, which protects the internal parts of the contactor and protects the users.



Repair Services for 100-E16KD400

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E16KD400

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E16KD400

Resolutions For 100-E16KD400

About

Technical Specifications for 100-E16KD400

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KD400
Product TypeAC/DC-Operated Contactor
Operating Voltage115 to 690 Volts AC, 24 to 440 Volts DC
Current Rating30 Amps
Coil TypeStandard AC/DC Type Electronic Coils
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Main Contacts4 Normally Open (NO) Contacts
Protection ClassIP2X
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KD400
Product TypeAC/DC-Operated Contactor
Operating Voltage115 to 690 Volts AC, 24 to 440 Volts DC
Current Rating30 Amps
Coil TypeStandard AC/DC Type Electronic Coils
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Main Contacts4 Normally Open (NO) Contacts
Protection ClassIP2X

About 100-E16KD400

The 100-E16KD400 IEC Large Frame Contactor is a 4-pole AC/DC contactor from the Allen-Bradley/Rockwell Automation Bulletin 100-E product line of high-performance industrial contactors from the IEC 100 Contactors series. These contactors are designed for direct-on-line connections to a power source, and they have a wider voltage range to suit a wider range of applications than most other contactors can handle. The 100-E16KD400 Contactor has a very compact design that features significantly reduced weight and dimensions to save as much panel space as possible. The 100-E16KD400 Contactor comes with standard AC/DC electronic coils and without a PLC interface. These standard universal AC/DC coils have an operating voltage range between 100 and 250 Volts AC (at 50/60 Hertz) and between 100 and 250 Volts DC. The coil comes with screw-type wiring terminals and Class F insulation for protection. 



 



The Allen-Bradley/Rockwell Automation 100-E16KD400 Contactor’s main circuit has an acceptable operating voltage range between 115 and 690 Volts AC (with 50/60 Hertz line frequency) and 24 and 440 Volts DC. The main circuit also has a carrying current capacity of 30 Amps at 600 and 690 Volts AC and a maximum switching rating of 9 kilowatts at 690 Volts AC. The 100-E16KD400 Contactor has an isolation voltage rating of up to 690 Volts AC and a maximum impulse withstand rating of up to 6000 Volts. The 100-E16KD400 Contactor has 4 Normally Open (NO) main pole contacts with screw-type terminals for quick and simplified field wiring. The 100-E16KD400 Contactor has a rated operating temperature range of -40 to 70 degrees Celsius, and it is designed for operating at altitudes of up to 3000 meters. The 100-E16KD400 Contactor has an IP2X industrial enclosure, which protects the internal parts of the contactor and protects the users.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF