100-E16KJ200 | Allen Bradley PLC IEC 100 Contactors

100-E16KJ200

100-E16KJ200

Description:

The contactor with the catalog number 100-E16KJ200 is manufactured by Allen-Bradley/Rockwell Automation through the 100-E/104-E product line and the IEC 100 Contactors series. The direct on-line contactor has 4 poles and it features a current rating of 30 Amps. The coil voltage rating of this contactor is 24 to 60 Volts AC or 20 to 60 Volts DC. 

Rated 4.9 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E16KJ200

Add more parts to quote

Description:

The contactor with the catalog number 100-E16KJ200 is manufactured by Allen-Bradley/Rockwell Automation through the 100-E/104-E product line and the IEC 100 Contactors series. The direct on-line contactor has 4 poles and it features a current rating of 30 Amps. The coil voltage rating of this contactor is 24 to 60 Volts AC or 20 to 60 Volts DC. 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E16KJ200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 11 reviews

    Technical Specifications for 100-E16KJ200

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KJ200
Number of Poles4
Product TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 690 Volts (AC-1)30 Amps
Rated Operational Current at 600 Volts (UL General Use)30 Amps
Main Poles2 N.O., 2 N.C.
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KJ200
Number of Poles4
Product TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 690 Volts (AC-1)30 Amps
Rated Operational Current at 600 Volts (UL General Use)30 Amps
Main Poles2 N.O., 2 N.C.
s

About 100-E16KJ200

The product code 100-E16KJ200 is reserved for an Allen-Bradley/Rockwell Automation contactor component that is made for harsh operating conditions within an industrial setting. It is part of the 100-E line in the IEC 100 Contactors series. The 100-E contactors can be installed at altitudes up to 3000 meters (9842.5 feet) above sea level and they support operation within a temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit). The 100-E16KJ200 contactor is a 4-pole unit featuring a coil voltage range of 24 to 60 Volts AC and 20 to 60 Volts DC. The unit has 2 normally open 2 normally closed poles or main contacts and it does not have any auxiliary contacts unless it is connected to an auxiliary contact block. This contactor has an IP 00 environmental protection rating for its main contacts.



 



The Allen-Bradley/Rockwell Automation 100-E16KJ200 IEC 100 series contactor supports an AC operating voltage frequency of 50 to 60 Hertz and it supports AC voltage ratings of 115, 200, 230, 240, 400, 415, 460, 500, 575, 690 and 1000 Volts AC. In addition to that, since this contactor also supports DC voltage operation, the DC voltage ratings of 24, 48, 110, 220, and 440 Volts DC. It has a rated isolation voltage of 600 Volts or 690 Volts and it has an operational current rating of 30 Amps for AC-1 motors and UL general-use motors. The 100-E16KJ200 contactor is built to meet various standards and approval ratings that are relevant for most industrial components and applications. The 100-E16KJ200 contactor is approved by the UL, CSA, CCC, EAC, RCM, ABS, CE, and SUVA standards, among others.   



Repair Services for 100-E16KJ200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E16KJ200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E16KJ200

Resolutions For 100-E16KJ200

About

Technical Specifications for 100-E16KJ200

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KJ200
Number of Poles4
Product TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 690 Volts (AC-1)30 Amps
Rated Operational Current at 600 Volts (UL General Use)30 Amps
Main Poles2 N.O., 2 N.C.
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E16KJ200
Number of Poles4
Product TypeDirect-On-Line Contactor
Rated Isolation Voltage (IEC)690 Volts
Rated Isolation Voltage (UL, CSA)600 Volts
Rated Operational Current at 690 Volts (AC-1)30 Amps
Rated Operational Current at 600 Volts (UL General Use)30 Amps
Main Poles2 N.O., 2 N.C.

About 100-E16KJ200

The product code 100-E16KJ200 is reserved for an Allen-Bradley/Rockwell Automation contactor component that is made for harsh operating conditions within an industrial setting. It is part of the 100-E line in the IEC 100 Contactors series. The 100-E contactors can be installed at altitudes up to 3000 meters (9842.5 feet) above sea level and they support operation within a temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit). The 100-E16KJ200 contactor is a 4-pole unit featuring a coil voltage range of 24 to 60 Volts AC and 20 to 60 Volts DC. The unit has 2 normally open 2 normally closed poles or main contacts and it does not have any auxiliary contacts unless it is connected to an auxiliary contact block. This contactor has an IP 00 environmental protection rating for its main contacts.



 



The Allen-Bradley/Rockwell Automation 100-E16KJ200 IEC 100 series contactor supports an AC operating voltage frequency of 50 to 60 Hertz and it supports AC voltage ratings of 115, 200, 230, 240, 400, 415, 460, 500, 575, 690 and 1000 Volts AC. In addition to that, since this contactor also supports DC voltage operation, the DC voltage ratings of 24, 48, 110, 220, and 440 Volts DC. It has a rated isolation voltage of 600 Volts or 690 Volts and it has an operational current rating of 30 Amps for AC-1 motors and UL general-use motors. The 100-E16KJ200 contactor is built to meet various standards and approval ratings that are relevant for most industrial components and applications. The 100-E16KJ200 contactor is approved by the UL, CSA, CCC, EAC, RCM, ABS, CE, and SUVA standards, among others.   



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E16KJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF