100-E190KN11 | Allen Bradley PLC IEC 100 Contactors

100-E190KN11

100-E190KN11

Description:

The Allen-Bradley 100-E190KN11 Contactor is a 3-pole type of electronic contactor from Bulletin 100E in the IEC 100 Contactors series. The 100-E190KN11 Contactor has a rated switching current rating of 190 Amps. Its operating voltage ranges from 115 to 575 Volts AC and 24 to 440 Volts DC.

Rated 4.7 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E190KN11

Add more parts to quote

Description:

The Allen-Bradley 100-E190KN11 Contactor is a 3-pole type of electronic contactor from Bulletin 100E in the IEC 100 Contactors series. The 100-E190KN11 Contactor has a rated switching current rating of 190 Amps. Its operating voltage ranges from 115 to 575 Volts AC and 24 to 440 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E190KN11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 19 reviews

    Technical Specifications for 100-E190KN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E190KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating190 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E190KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating190 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
s

About 100-E190KN11

The 100-E190KN11 3-Pole AC/DC Operated Contactor is an IEC 100 Contactors series contactor from the Allen-Bradley Bulletin 100E product line of large frame contactors. The 100-E190KN11 Contactor offers bolt-in terminal connections to the main circuit current. All the other contacts on the 100-E190KN11 Contactor circuits have bolt-in type terminals for making fast and simplified field-through wiring connections. The 100-E190KN11 Contactor is designed for 3-phase connections, and it comes with 3 main contacts that are all normally open for direct 3-phase wiring. The 100-E190KN11 Contactor supports direct wiring to 3-phase power supplies, and when it is used with direct-on-line starters, it can be used to wire 3-phase AC motors to the direct power supply. The 100-E190KN11 Contactor also has 2 factory-fitted side-mounted auxiliary contacts (1 normally open and 1 normally closed) with bolt-in terminals.



The Allen-Bradley 100-E190KN11 Contactor has a universal electronic control coil that accepts AC/DC actuating voltage. This AC/DC coil helps to expand the application options of the 100-E190KN11 Contactor and to make the device selection process easier. The 100-E190KN11 Contactor’s coil has a rated control voltage rating of 250 Volts DC to 500 Volts DC or 250 Volts AC to 500 Volts AC (at 50 Hertz). The coil has Class F insulation that offers thermal stability at full loads. The 100-E190KN11 Contactor has a rated operating current of 190 Amps for AC-3 motors at 400 Volts AC and 275 Amps at 400 Volts AC for AC-1 motors. The 100-E190KN11 Contactor’s main circuit is designed to accept AC or DC inputs. It has a rated operating voltage range of 24 to 440 Volts DC or 115 to 575 Volts AC. It also has a maximum switching power rating of 90 Kilowatts with AC-3 motors at 415 Volts AC.



Repair Services for 100-E190KN11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E190KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E190KN11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E190KN11

Resolutions For 100-E190KN11

About

Technical Specifications for 100-E190KN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E190KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating190 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E190KN11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating190 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X

About 100-E190KN11

The 100-E190KN11 3-Pole AC/DC Operated Contactor is an IEC 100 Contactors series contactor from the Allen-Bradley Bulletin 100E product line of large frame contactors. The 100-E190KN11 Contactor offers bolt-in terminal connections to the main circuit current. All the other contacts on the 100-E190KN11 Contactor circuits have bolt-in type terminals for making fast and simplified field-through wiring connections. The 100-E190KN11 Contactor is designed for 3-phase connections, and it comes with 3 main contacts that are all normally open for direct 3-phase wiring. The 100-E190KN11 Contactor supports direct wiring to 3-phase power supplies, and when it is used with direct-on-line starters, it can be used to wire 3-phase AC motors to the direct power supply. The 100-E190KN11 Contactor also has 2 factory-fitted side-mounted auxiliary contacts (1 normally open and 1 normally closed) with bolt-in terminals.



The Allen-Bradley 100-E190KN11 Contactor has a universal electronic control coil that accepts AC/DC actuating voltage. This AC/DC coil helps to expand the application options of the 100-E190KN11 Contactor and to make the device selection process easier. The 100-E190KN11 Contactor’s coil has a rated control voltage rating of 250 Volts DC to 500 Volts DC or 250 Volts AC to 500 Volts AC (at 50 Hertz). The coil has Class F insulation that offers thermal stability at full loads. The 100-E190KN11 Contactor has a rated operating current of 190 Amps for AC-3 motors at 400 Volts AC and 275 Amps at 400 Volts AC for AC-1 motors. The 100-E190KN11 Contactor’s main circuit is designed to accept AC or DC inputs. It has a rated operating voltage range of 24 to 440 Volts DC or 115 to 575 Volts AC. It also has a maximum switching power rating of 90 Kilowatts with AC-3 motors at 415 Volts AC.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E190KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E190KN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF