100-E265ED11 | Allen Bradley PLC IEC 100 Contactors

100-E265ED11

100-E265ED11

Description:

The Allen-Bradley 100-E265ED11 contactor is a direct-on-line contactor from the IEC 100 Contactors series. It has 3 poles and an electronic AC/DC coil. The 100-E265ED11 contactor can operate with up to 400 Amps of current.

Rated 4.9 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E265ED11

Add more parts to quote

Description:

The Allen-Bradley 100-E265ED11 contactor is a direct-on-line contactor from the IEC 100 Contactors series. It has 3 poles and an electronic AC/DC coil. The 100-E265ED11 contactor can operate with up to 400 Amps of current.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E265ED11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 12 reviews

    Technical Specifications for 100-E265ED11

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NO, 1 NC
Coil TypeElectronic AC/DC Coil
AC Coil Voltage100 to 250 Volts AC (50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NO, 1 NC
Coil TypeElectronic AC/DC Coil
AC Coil Voltage100 to 250 Volts AC (50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
s

About 100-E265ED11

The 100-E265ED11 contactor is an Allen-Bradley/Rockwell Automation IEC 100 series direct-on-line contactor that comes with 3 poles and with 2 built-in auxiliary contacts. It can operate with different AC and DC voltage ratings and it has a standard electronic AC/DC coil with a coil voltage range of 100 to 250 Volts AC/DC (with an AC frequency range from 50 to 60 Hertz). The 100-E265ED11 direct-on-line contactor can be specially ordered with an electronic AC/DC coil that comes with an input for a PLC (Programmable Logic Controller) interface, but a contactor with this kind of coil should only be ordered and installed if it is guaranteed that a PLC interface will also be installed and regularly used. Leaving the PLC input unused is not recommended.



 



In addition to PLCs, the Allen-Bradley/Rockwell Automation 100-E265ED11 IEC 100 series direct-on-line contactor can connect to mechanical interlocks, terminal lugs, terminal shrouds, and terminal shields. The mechanical interlocks and terminal lugs increase the contactor’s connection and application capacity and the terminal shrouds and terminal shields protect the contactor and its users. The 100-E265ED11 direct-on-line contactor is commonly used in applications with AC motors that are AC-1, AC-2, and AC-3 types of motors, and it can support different levels of current, kilowatt output, and Horsepower output. The 100-E265ED11 direct-on-line contactor’s supported current ratings are 265 Amps with AC-3 motors rated at 400 Volts and 400 Amps with AC-1 motors rated at 690 Volts. When operating with AC-2 and AC-3 motors, this contactor’s maximum kilowatt output rating is 200 kilowatts and its maximum Horsepower output rating is 250 Horsepower.



Repair Services for 100-E265ED11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E265ED11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E265ED11

Resolutions For 100-E265ED11

About

Technical Specifications for 100-E265ED11

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NO, 1 NC
Coil TypeElectronic AC/DC Coil
AC Coil Voltage100 to 250 Volts AC (50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265ED11
Product TypeDirect-on-Line Contactor
Number of Poles3
Number of Auxiliary Contacts2
Auxiliary Contact Types1 NO, 1 NC
Coil TypeElectronic AC/DC Coil
AC Coil Voltage100 to 250 Volts AC (50 to 60 Hertz)
DC Coil Voltage100 to 250 Volts DC

About 100-E265ED11

The 100-E265ED11 contactor is an Allen-Bradley/Rockwell Automation IEC 100 series direct-on-line contactor that comes with 3 poles and with 2 built-in auxiliary contacts. It can operate with different AC and DC voltage ratings and it has a standard electronic AC/DC coil with a coil voltage range of 100 to 250 Volts AC/DC (with an AC frequency range from 50 to 60 Hertz). The 100-E265ED11 direct-on-line contactor can be specially ordered with an electronic AC/DC coil that comes with an input for a PLC (Programmable Logic Controller) interface, but a contactor with this kind of coil should only be ordered and installed if it is guaranteed that a PLC interface will also be installed and regularly used. Leaving the PLC input unused is not recommended.



 



In addition to PLCs, the Allen-Bradley/Rockwell Automation 100-E265ED11 IEC 100 series direct-on-line contactor can connect to mechanical interlocks, terminal lugs, terminal shrouds, and terminal shields. The mechanical interlocks and terminal lugs increase the contactor’s connection and application capacity and the terminal shrouds and terminal shields protect the contactor and its users. The 100-E265ED11 direct-on-line contactor is commonly used in applications with AC motors that are AC-1, AC-2, and AC-3 types of motors, and it can support different levels of current, kilowatt output, and Horsepower output. The 100-E265ED11 direct-on-line contactor’s supported current ratings are 265 Amps with AC-3 motors rated at 400 Volts and 400 Amps with AC-1 motors rated at 690 Volts. When operating with AC-2 and AC-3 motors, this contactor’s maximum kilowatt output rating is 200 kilowatts and its maximum Horsepower output rating is 250 Horsepower.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265ED11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF