100-E265KD11 | Allen Bradley PLC IEC 100 Contactors

100-E265KD11

100-E265KD11

Description:

The Allen-Bradley 100-E265KD11 Contactor is a 3-pole, DIN Rail/panel-mounted electronic contactor from the IEC 100 Contactors series. The 100-E265KD11 Contactor has a rated switching current of 265 Amps. Its operating voltage ranges are 115 to 575 Volts AC and 24 to 440 Volts DC.

Rated 4.9 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E265KD11

Add more parts to quote

Description:

The Allen-Bradley 100-E265KD11 Contactor is a 3-pole, DIN Rail/panel-mounted electronic contactor from the IEC 100 Contactors series. The 100-E265KD11 Contactor has a rated switching current of 265 Amps. Its operating voltage ranges are 115 to 575 Volts AC and 24 to 440 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E265KD11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 6 reviews

    Technical Specifications for 100-E265KD11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265KD11
DescriptionAC/DC-Operated Contactor
Operating Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating265 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265KD11
DescriptionAC/DC-Operated Contactor
Operating Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating265 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
s

About 100-E265KD11

The Allen-Bradley 100-E265KD11 3-Pole AC/DC Contactor is s 3-phase, direct-on-line contactor from the Bulletin 100E line of compact yet high-performance contactors from the IEC 100 Contactors series. The 100-E265KD11 Contactor has bolt-on types of terminal connections to the main current circuit. These bolt-in terminals provide an easy and quick wiring process for all the field-through wiring. This contactor has 3 normally open contacts as the main wiring contacts. It also has 2 snap-in type factory-fitted auxiliary contacts (1 NC and 1 NO) that can be mounted on the side of the contactor. Additional contacts (NO or NC) can be ordered separately to meet different application needs. The 100-E265KD11 Contactor comes with a universal AC/DC coil option. This coil accepts AC or DC actuating voltage, which allows it to accommodate a wide range of applications and helps to streamline the contactor selection process.



The Allen-Bradley 100-E265KD11 IEC 100 Contactor’s coil has a rated control supply voltage range of 100 Volts AC to 250 Volts AC (at 50 Hertz) or 100 Volts DC to 250 Volts DC. The coil also has IEC rated insulation that has a Class F rating, which provides electrical insulation even at high operating temperatures (up to 180 degrees Celsius). The 100-E265KD11 Contactor has an operating current rating of 265 Amps with AC-3 motors and 400 Amps with AC-1 motors at 400 Volts AC and 50 Hertz and a maximum switching power of 132 Kilowatts with AC-3 motors at 415 Volts AC and 50 Hertz. The 100-E265KD11 Contactor circuits can accept inputs directly from an AC or DC power supply. It has a rated operating voltage range of 115 Volts AC to 575 Volts AC (50/60 Hertz) and 24 Volts DC to 440 Volts DC. The 100-E265KD11 Contactor has an ambient operating temperature range of -40 to 70 degrees Celsius and a maximum installation altitude of 2000 meters above sea level.



Repair Services for 100-E265KD11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265KD11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E265KD11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E265KD11

Resolutions For 100-E265KD11

About

Technical Specifications for 100-E265KD11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265KD11
DescriptionAC/DC-Operated Contactor
Operating Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating265 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E265KD11
DescriptionAC/DC-Operated Contactor
Operating Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating265 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage100 to 250 Volts AC/DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-on
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X

About 100-E265KD11

The Allen-Bradley 100-E265KD11 3-Pole AC/DC Contactor is s 3-phase, direct-on-line contactor from the Bulletin 100E line of compact yet high-performance contactors from the IEC 100 Contactors series. The 100-E265KD11 Contactor has bolt-on types of terminal connections to the main current circuit. These bolt-in terminals provide an easy and quick wiring process for all the field-through wiring. This contactor has 3 normally open contacts as the main wiring contacts. It also has 2 snap-in type factory-fitted auxiliary contacts (1 NC and 1 NO) that can be mounted on the side of the contactor. Additional contacts (NO or NC) can be ordered separately to meet different application needs. The 100-E265KD11 Contactor comes with a universal AC/DC coil option. This coil accepts AC or DC actuating voltage, which allows it to accommodate a wide range of applications and helps to streamline the contactor selection process.



The Allen-Bradley 100-E265KD11 IEC 100 Contactor’s coil has a rated control supply voltage range of 100 Volts AC to 250 Volts AC (at 50 Hertz) or 100 Volts DC to 250 Volts DC. The coil also has IEC rated insulation that has a Class F rating, which provides electrical insulation even at high operating temperatures (up to 180 degrees Celsius). The 100-E265KD11 Contactor has an operating current rating of 265 Amps with AC-3 motors and 400 Amps with AC-1 motors at 400 Volts AC and 50 Hertz and a maximum switching power of 132 Kilowatts with AC-3 motors at 415 Volts AC and 50 Hertz. The 100-E265KD11 Contactor circuits can accept inputs directly from an AC or DC power supply. It has a rated operating voltage range of 115 Volts AC to 575 Volts AC (50/60 Hertz) and 24 Volts DC to 440 Volts DC. The 100-E265KD11 Contactor has an ambient operating temperature range of -40 to 70 degrees Celsius and a maximum installation altitude of 2000 meters above sea level.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265KD11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E265KD11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF