100-E26EJ200 | Allen Bradley PLC IEC 100 Contactors

100-E26EJ200

100-E26EJ200

Description:

The 100-E26EJ200 contactor is designed and manufactured by Allen-Bradley/Rockwell Automation and it is part of the IEC 100 Contactors series. This direct-on-line contactor unit has 4 poles and a maximum rated isolation voltage of 690 Volts. The unit has a rated operational current of 45 Amps and it features an operating frequency of 50 to 60 Hertz. 

Rated 4.7 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E26EJ200

Add more parts to quote

Description:

The 100-E26EJ200 contactor is designed and manufactured by Allen-Bradley/Rockwell Automation and it is part of the IEC 100 Contactors series. This direct-on-line contactor unit has 4 poles and a maximum rated isolation voltage of 690 Volts. The unit has a rated operational current of 45 Amps and it features an operating frequency of 50 to 60 Hertz. 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E26EJ200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 9 reviews

    Technical Specifications for 100-E26EJ200

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part number100-E26EJ200
Product typeDirect-on-line contactor
Rated isolation voltage (IEC)690 Volts
Rated isolation voltage (UL, CSA)600 Volts
Rated operational current at 690 Volts (AC-1)45 Amps
Rated operational current at 600 Volts (UL General Use)45 Amps
Main poles2 N.O./2 N.C.
Auxiliary contactsNone
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part number100-E26EJ200
Product typeDirect-on-line contactor
Rated isolation voltage (IEC)690 Volts
Rated isolation voltage (UL, CSA)600 Volts
Rated operational current at 690 Volts (AC-1)45 Amps
Rated operational current at 600 Volts (UL General Use)45 Amps
Main poles2 N.O./2 N.C.
Auxiliary contactsNone
s

About 100-E26EJ200

The contactor unit labelled with the product code 100-E26EJ200 is an Allen-Bradley/Rockwell Automation contactor component that is made for connection to either AC or DC power sources for operation. The unit operates on a wide range of voltage ratings, including ratings of up to 690 Volts AC when it is running on AC voltage. The rated operating voltage when the 100-E26EJ200 contactor is connected to a DC power source ranges from 24 to 440 Volts DC. The UL/CSA rated isolation voltage rating is 600 Volts while the IEC rated isolation voltage is 1000 Volts. The 100-E26EJ200 contactor has 8 kilovolts of rated impulse voltage and an operating frequency of 50 to 60 Hertz.



 



The 100-E26EJ200 contactor complies with the IEC 60947-1-Environment A electromagnetic compatibility standards and it carries a Class F rating for the coil insulation. The unit tolerates very high and very low temperatures for both operation and storage, and it supports a maximum installation altitude of 3000 meters or 9842.5 feet. The 100-E26EJ200 contactor features 4 poles and it complies with industrial standards for resistance to shock, resistance to vibration, functional safety, and mechanical construction. The unit has a main pole configuration of 2 N.O. main contacts and 2 N.C. main contacts, and zero auxiliary contacts. Its coil voltage ratings are 24 to 60 Volts AC (at 50 to 60 Hertz), and 20 to 60 Volts DC. The 100-E26EJ200 contactor is designed in accordance with the IEC/EN 60947-1 standards for low-voltage switch gear and control gear and also in accordance with various other standards for industrial equipment usage.



Repair Services for 100-E26EJ200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E26EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E26EJ200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E26EJ200

Resolutions For 100-E26EJ200

About

Technical Specifications for 100-E26EJ200

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part number100-E26EJ200
Product typeDirect-on-line contactor
Rated isolation voltage (IEC)690 Volts
Rated isolation voltage (UL, CSA)600 Volts
Rated operational current at 690 Volts (AC-1)45 Amps
Rated operational current at 600 Volts (UL General Use)45 Amps
Main poles2 N.O./2 N.C.
Auxiliary contactsNone
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part number100-E26EJ200
Product typeDirect-on-line contactor
Rated isolation voltage (IEC)690 Volts
Rated isolation voltage (UL, CSA)600 Volts
Rated operational current at 690 Volts (AC-1)45 Amps
Rated operational current at 600 Volts (UL General Use)45 Amps
Main poles2 N.O./2 N.C.
Auxiliary contactsNone

About 100-E26EJ200

The contactor unit labelled with the product code 100-E26EJ200 is an Allen-Bradley/Rockwell Automation contactor component that is made for connection to either AC or DC power sources for operation. The unit operates on a wide range of voltage ratings, including ratings of up to 690 Volts AC when it is running on AC voltage. The rated operating voltage when the 100-E26EJ200 contactor is connected to a DC power source ranges from 24 to 440 Volts DC. The UL/CSA rated isolation voltage rating is 600 Volts while the IEC rated isolation voltage is 1000 Volts. The 100-E26EJ200 contactor has 8 kilovolts of rated impulse voltage and an operating frequency of 50 to 60 Hertz.



 



The 100-E26EJ200 contactor complies with the IEC 60947-1-Environment A electromagnetic compatibility standards and it carries a Class F rating for the coil insulation. The unit tolerates very high and very low temperatures for both operation and storage, and it supports a maximum installation altitude of 3000 meters or 9842.5 feet. The 100-E26EJ200 contactor features 4 poles and it complies with industrial standards for resistance to shock, resistance to vibration, functional safety, and mechanical construction. The unit has a main pole configuration of 2 N.O. main contacts and 2 N.C. main contacts, and zero auxiliary contacts. Its coil voltage ratings are 24 to 60 Volts AC (at 50 to 60 Hertz), and 20 to 60 Volts DC. The 100-E26EJ200 contactor is designed in accordance with the IEC/EN 60947-1 standards for low-voltage switch gear and control gear and also in accordance with various other standards for industrial equipment usage.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E26EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E26EJ200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF