100-E26KD400

The 100-E26KD400 IEC 100 contactor is an IEC 100 series standard large frame contactor developed by Allen-Bradley/Rockwell Automation. It is a direct-on-line contactor from the Allen-Bradley Bulletin 100-E product line. The Bulletin 100-E series 100-E26KD400 contactor has a space-saving design and electronic coils that use less power to operate than other contactor coils. The 100-E26KD400 contactor has 4 main poles with normally open main contacts and no normally closed main contacts. This model does not have any auxiliary contacts. If needed, auxiliary contact blocks can be used with the contactor. The auxiliary contact blocks can be easily mounted on the front or side of the contactor. Additional terminal blocks can also be used with the 100-E26KD400 contactor to increase the wire size capacity if necessary.

The Allen-Bradley/Rockwell Automation 100-E26KD400 contactor is rated for utilization category AC-1. Its AC-1 current rating is 45 Amps at 690 Volts and an ambient temperature of 40 degrees Celsius. The rated operational power of the 100-E26KD400 contactor at 690 Volts is 54 kilowatts at 40 degrees Celsius and 48 kilowatts at 60 degrees Celsius. This IEC contactor has a standard AC/DC electronic coil with a 100 to 250 Volts AC and DC operating voltage range. The operating frequencies of the AC voltages are 50 or 60 Hertz. The contactor coil has a pick-up current of 50 Volts-Amperes and a hold-in current of 2.2 Volts-Amps. The dimensions of the Allen-Bradley 100-E26KD400 contactor with a standard coil are approximately 80 millimeters in height, 45 millimeters in width, and 86 millimeters in depth. The screw-type connection terminals on this contactor have a recommended torque rating of 1.5 N-m.