The 100-E26KJ00 contactor is an Allen-Bradley contactor from the IEC 100 Contactors series and the Bulletin 100 product line. It is an IEC-compliant contactor that saves space and energy. This large frame IEC 100-E contactor is a replacement for the older Allen-Bradley 100-D and 100-G series contactors with a smaller build, lighter weight, and lower power consumption rating than the previous models. It works with AC/DC coils for flexibility and efficiency. The 100-E26KJ00 contactor is equipped with a standard AC/DC electronic coil (with the coil code KJ) and with a control voltage range of 20 to 60 Volts DC and 24 to 60 Volts AC at 50 or 60 Hertz operating frequency. The 100-E26KJ00 contactor's electronic coil does not include a PLC input option. The standard coil has low pick-up and hold-in power consumption ratings of 50 Watts and 2 Watts, respectively.

The Allen-Bradley 100-E26KJ00 IEC 100 series contactor is a 3-pole, direct-on-line AC and DC-operated contactor. The contactor has 3 normally open main contacts but no normally closed contacts and no auxiliary contacts. It allows for the quick and simple front-mounting of auxiliary contact blocks with 4-pole and 2-pole contacts in special applications where auxiliary contacts are required. The applications for the contactor are classified in the AC-1 and AC-3 utilization categories. This contactor has an AC-1 current rating of 30 Amps at 690 Volts and 45 degrees Celsius, and an AC-3 current rating of 26 Amps at 400 Volts and 60 degrees Celsius. It can switch AC-3 motors with outputs ranging from 6.5 kilowatts at 220 to 240 Volts to 15 kilowatts at 690 Volts, all at 50 Hertz frequency.