100-E26KN400

The 100-E26KN400 contactor is a 4-pole contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This contactor is included in the Allen-Bradley IEC 100 family of safety contactors. This part is intended to operate in motor control applications that require high switching capabilities. The design of this contactor includes materials that do not cause any harm or damage to the environment and it is a compact design that makes it suitable for applications with tight space requirements. Even with its compact design, the contactor provides a high level of performance and reliable operation. The Allen-Bradley/Rockwell Automation 100-E26KN400 4-pole contactor comes with electronic coils that operate with a voltage rating of 250 to 500 Volts AC and DC. These electronic coils also use a frequency of 50 to 60 Hertz with AC voltage. The contactor does not include auxiliary contacts.

The Allen-Bradley/Rockwell Automation 100-E26KN400 4-pole contactor comes with 4 normally open contacts that operate with a current rating of 45 Amps at a specific ambient temperature of 40 degrees Celsius. This contactor can be installed on a DIN Rail or it can be mounted on a panel. The most common applications for the use of this contactor are applications in mining. The Allen-Bradley/Rockwell Automation 100-E26KN400 4-pole contactor includes built-in surge suppression features and it operates with a low power consumption rating. The main contacts are not covered by any kind of enclosure and the rated temperature for operations must not fall outside of the -40 to 70 degrees Celsius operating temperature range. The maximum altitude that is supported for the installation of this contactor is 3000 meters above sea level.