100-E305KY11

The Allen-Bradley 100-E305KY11 3-Pole Contactor is an AC/DC-operated contactor that is designed for a wide range of industrial applications. The 100-E305KY11 Contactor accepts AC or DC voltage actuation. It comes with an AC/DC actuating coil that helps streamline the device selection process. The coil offers a wide operating voltage range to accommodate a broader range of applications. The 100-E305KY11 Contactor has a control voltage range of 24 to 60 Volts AC (50 Hertz) or 20 to 60 Volts DC. The 100-E305KY11 Contactor’s coil comes with Class F insulation that provides electrical and thermal insulation at full loads. The 100-E305KY11 Contactor has a rated operating power of 160 Kilowatts with AC-3 motors at 415 Volts AC and an operating current rating of 305 Amps with AC-3 motors and of 500 Amps with AC-1 motors at 400 Volts AC.

The 100-E305KY11 Contactor supports a direct-on-line connection to a 3-phase power supply. It accepts AC or DC voltage with operating voltage ranges from 115 to 575 Volts AC or 24 to 440 Volts DC. Its main circuit offers voltage suppression capabilities as well isolation protection and impulse withstand protection ratings of up to 690 Volts and 8000 Volts, respectively. The 100-E305KY11 Contactor has 3 normally open contacts (no normally closed contacts are available) as the main connection contacts. It also has 2 factory-installed auxiliary contacts (1 NC and 1 NO) for lower switching current levels when the contacts close. User-supplied auxiliary contacts (NO or NC) can also be added to expand the contactor’s functionalities even further. The 100-E305KY11 Contactor has bolt-in type line-side terminals for wiring to the main circuit current. The 100-E305KY11 Contactor has an ambient operating temperature range of -40 to 70 degrees Celsius and an ingress protection rating of IP2X.