100-E30EJ00

The 100-E30EJ00 IEC 100 contactor is a large frame contactor manufactured by Allen-Bradley/Rockwell Automation. The contactor is IEC certified and it is part of the Bulletin 100-E line of IEC 100 series contactors. The operating current rating of the 100-E30EJ00 contactor with AC-3 motors is 32 Amps at 400 Volts AC at 60 degrees Celsius. The contactor comes with screw-type terminals for connecting the wiring. The contactor also has an AC-1 motor current rating of 50 Amps at 690 Volts and an operating temperature of 40 degrees Celsius. The rated operating power of the 100-E30EJ00 contactor is 15 kilowatts for 400 Volts AC with AC-3 motors and its operating power is 60 kilowatts for 690 Volts AC with AC-1 motors at 40 degrees Celsius. To increase the AC-1 motor load, paralleling terminals can be used with the contactor to connect the poles in parallel. The contactor's load-carrying capacity at a general-purpose current rating of 600 Volts is 24 Amps, as per the UL/CSA standards.

The Allen-Bradley/Rockwell Automation 100-E30EJ00 IEC 100 contactor comes with a low-consumption electronic AC/DC coil with a rated operating frequency of 50/60 Hertz. The energy-efficient coil on the 100-E30EJ00 contactor has a pick-up power rating of 16 Volts-Amps and a hold-in power rating of 1.7 Volts-Amps. The coil's control voltage ranges from 20 to 60 Volts DC or 24 to 60 Volts AC at 50 or 60 Hertz operating frequency. The 100-E30EJ00 contactor facilitates switching for AC-3 motors rated at 10 Horsepower at 200 Volts and AC-3 motors rated at 25 Horsepower at 575 Volts, both with a frequency of 60 Hertz. This Allen-Bradley large frame MCS-E contactor has 3 Normally Open (N.O.) main contacts and no auxiliary contacts. The unit is approximately 80 millimeters high, 45 millimeters wide, and 86 millimeters deep, and it can be panel mounted.