100-E30EQ00 | Allen Bradley PLC IEC 100 Contactors

100-E30EQ00

100-E30EQ00

Description:

The 100-E30EQ00 contactor is a direct-on-line IEC certified and IEC 100 series contactor from Allen-Bradley. It has a rated operating current of 32 Amps. It comes with 3 normally open main contacts. It has a low-power consumption electronic coil with a control voltage range of 12 to 20 Volts DC and 24 to 60 Volts AC.

Rated 4.8 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E30EQ00

Add more parts to quote

Description:

The 100-E30EQ00 contactor is a direct-on-line IEC certified and IEC 100 series contactor from Allen-Bradley. It has a rated operating current of 32 Amps. It comes with 3 normally open main contacts. It has a low-power consumption electronic coil with a control voltage range of 12 to 20 Volts DC and 24 to 60 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E30EQ00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 19 reviews

    Technical Specifications for 100-E30EQ00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E30EQ00
Product DescriptionIEC Contactor
Product SeriesBulletin 100-E
Rated Operational Current 32 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Electronic Coil
Control Voltage12-20V DC, 24-60V AC, Low Consumption
AC Voltage Frequency50/60 Hz
Main Poles3
Main Contact Configuration3. N.O., 0 N.C.
Auxiliary ContactsNone
Connection TypeScrew Terminals
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E30EQ00
Product DescriptionIEC Contactor
Product SeriesBulletin 100-E
Rated Operational Current 32 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Electronic Coil
Control Voltage12-20V DC, 24-60V AC, Low Consumption
AC Voltage Frequency50/60 Hz
Main Poles3
Main Contact Configuration3. N.O., 0 N.C.
Auxiliary ContactsNone
Connection TypeScrew Terminals
s

About 100-E30EQ00

The 100-E30EQ00 contactor is a direct-on-line IEC certified contactor from Allen-Bradley and the IEC 100 Contactors series. It is part of the Allen-Bradley Bulletin 100 line of contactors. This contactor is smaller in size than previous contactor versions and it is simple to install. To expand the functionality of the 100-E30EQ00 contactor, a variety of add-on accessories are available for use with it in special applications. It has a 32 Amps AC-3 utilization current rating at 400 Volts AC and an operating temperature of 60 degrees Celsius. It also has an AC-1 utilization current rating of 50 Amps at 690 Volts and 40 degrees Celsius. It can switch up to 9-kilowatts motors at an AC voltage range of 220 to 240 Volts AC and an operating frequency of 50 Hertz. It supports the switching of 11-kilowatt 3-phase motors with an AC voltage range of 380 to 415 Volts at 50 Hertz.



The Allen-Bradley 100-E30EQ00 3-pole AC/DC IEC 100 contactor comes with 3 normally open main contacts and no normally closed or auxiliary contacts. The unit is equipped with screw-clamp connection terminals. According to the UL/CSA standards, the main contact terminal has a recommended torque rating of 2.5 N-m and a cross-section of 14 to 8 AWG. The 100-E30EQ00 contactor has an electronic coil that has a low power consumption rating. The control voltage ranges of the coil are 12 to 20 Volts DC and 24 to 60 Volts AC at 50/60 Hertz. The “EQ” coil has a pick-up power range of 12 to 16 Watts and a hold-in power rating of 1.7 Watts, making it very energy-efficient. The 100-E30EQ00 contactor has a compact design and it measures 80 millimeters in height, 45 millimeters in width, and 86 millimeters in depth. It can be mounted easily and securely on a 35-millimeter DIN Rail.



Repair Services for 100-E30EQ00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E30EQ00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E30EQ00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E30EQ00

Resolutions For 100-E30EQ00

About

Technical Specifications for 100-E30EQ00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E30EQ00
Product DescriptionIEC Contactor
Product SeriesBulletin 100-E
Rated Operational Current 32 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Electronic Coil
Control Voltage12-20V DC, 24-60V AC, Low Consumption
AC Voltage Frequency50/60 Hz
Main Poles3
Main Contact Configuration3. N.O., 0 N.C.
Auxiliary ContactsNone
Connection TypeScrew Terminals
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E30EQ00
Product DescriptionIEC Contactor
Product SeriesBulletin 100-E
Rated Operational Current 32 Amps
Utilization CategoryAC-3, AC-1 Motors
Coil Type Electronic Coil
Control Voltage12-20V DC, 24-60V AC, Low Consumption
AC Voltage Frequency50/60 Hz
Main Poles3
Main Contact Configuration3. N.O., 0 N.C.
Auxiliary ContactsNone
Connection TypeScrew Terminals

About 100-E30EQ00

The 100-E30EQ00 contactor is a direct-on-line IEC certified contactor from Allen-Bradley and the IEC 100 Contactors series. It is part of the Allen-Bradley Bulletin 100 line of contactors. This contactor is smaller in size than previous contactor versions and it is simple to install. To expand the functionality of the 100-E30EQ00 contactor, a variety of add-on accessories are available for use with it in special applications. It has a 32 Amps AC-3 utilization current rating at 400 Volts AC and an operating temperature of 60 degrees Celsius. It also has an AC-1 utilization current rating of 50 Amps at 690 Volts and 40 degrees Celsius. It can switch up to 9-kilowatts motors at an AC voltage range of 220 to 240 Volts AC and an operating frequency of 50 Hertz. It supports the switching of 11-kilowatt 3-phase motors with an AC voltage range of 380 to 415 Volts at 50 Hertz.



The Allen-Bradley 100-E30EQ00 3-pole AC/DC IEC 100 contactor comes with 3 normally open main contacts and no normally closed or auxiliary contacts. The unit is equipped with screw-clamp connection terminals. According to the UL/CSA standards, the main contact terminal has a recommended torque rating of 2.5 N-m and a cross-section of 14 to 8 AWG. The 100-E30EQ00 contactor has an electronic coil that has a low power consumption rating. The control voltage ranges of the coil are 12 to 20 Volts DC and 24 to 60 Volts AC at 50/60 Hertz. The “EQ” coil has a pick-up power range of 12 to 16 Watts and a hold-in power rating of 1.7 Watts, making it very energy-efficient. The 100-E30EQ00 contactor has a compact design and it measures 80 millimeters in height, 45 millimeters in width, and 86 millimeters in depth. It can be mounted easily and securely on a 35-millimeter DIN Rail.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E30EQ00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E30EQ00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF