100-E30KN00

The 100-E30KN00 contactor is an MCS-E IEC 100 series contactor from Allen-Bradley that operates as a motor control product. It complies with the IEC standards. It is small in size and has a modular design, but it is sturdy and durable, making it suitable for use in demanding environments. The Allen-Bradley 100-E30KN00 contactor is a direct-on-line contactor that belongs to the Bulletin 100-E line of power-efficient IEC 100 contactors. It is equipped with a next-generation electronic coil that can be controlled in both AC and DC modes. A variety of accessories are readily available for use with the 100-E30KN00 contactor to expand its functionalities even further. It has a maximum AC-1 current rating of 50 Amps and a utilization category AC-3 current rating of 32 Amps. As per the IEC standards, the rated isolation voltage of the 100-E30KN00 contactor is 690 Volts.

The Allen-Bradley 100-E30KN00 contactor has a standard electronic coil and a control voltage range of 250 to 500 Volts AC and DC. The coil's rated operating frequency is 50/60 Hertz. The standard coil of the contactor has a holding current rating of 2.2 Volts-Amps and a pick-up power of 50 Watts. This IEC 100-E contactor has 3 main poles and no auxiliary contacts. The 100-E30KN00 contactor can be equipped with external auxiliary contact blocks if needed. It can switch 10 Horsepower AC motors at 200 volts and 60 Hertz, as well as 20 Horsepower AC motors at 460 Volts and 60 Hertz. It also supports motor power ratings ranging from 9 to 18.5 kilowatts at a voltage range of 220 to 690 Volts AC at 50 Hertz. The screw-type terminals on the 100-E30KN00 direct-on-line contactor have a recommended tightening torque of 2.5 N-m. The 100-E30KN00 contactor has a small form factor and it can be easily mounted onto a 35-millimeter DIN Rail.